ARRMA Tsaagan 6s BLX 1/12th 4wd truck By TpParts RcXtreme
TpPartsRcXtreme

ARRMA Tsaagan 6s BLX 1/12th 4wd truck By TpParts RcXtreme

After maiden run..
The build is cool, the shocks are on overkill. Could have used 1/10th buggy or rally shocks instead, save weight and more practical.
 
Thanks buddy ?

The best thing, they are 100% perfect, not only they are made for this suspension oarts, they look good. A 1/10th shock would not only look bad, i have to start over to get a good setup, and kn the end never be as good as the stock for what i do, here it is ready for 60 feet of air ?
 
Its a 1/12, its a light rig, there are plenty of high end 1/10 shocks that will do a much better job than what you got. I saw the videos, and its as stiff as can be, like pogo sticks. May look cool and all, but also they are inefficient for the task at hand.
 
I don't wanna be that guy, its a bit different to se and drive a car..and its minus degree wich of eff2ct the oil. Light?..who said this creation is light, i might save a few grams or rather gained due to 4mm chassi, topdexk and more....so to use 1/10th on a 3kg++ rig aint an option. I know there are good shocks buddy, been racing for a long time.


It might be small but heavy AF.
Setup, is good for me, what ever we see

Im haooy for you input ❤
 
Its a 1/12, its a light rig, there are plenty of high end 1/10 shocks that will do a much better job than what you got. I saw the videos, and its as stiff as can be, like pogo sticks. May look cool and all, but also they are inefficient for the task at hand.
I'll be that guy then :LOL: The version I made simply uses a complete Typhon chassis, cut into 3 parts & bolted back together. It doesn't have the Typhon wing, side guards, or chassis braces. It does have a custom front bumper, wheelie bar, light right side guard, & 2 piece aluminum chassis braces. It's only 2oz less than my v3 Typhon w/ custom front bumper & full aluminum chassis brace. I have several large scale cars with 4mm thick 7075 chassis as well as plates of 4mm 7075 I might use for this project. However, even with the reduced size, the chassis will weigh more than the stock Typhon chassis. 4mm 7075 is that much of a beast.
 

Media information

Category
Arrma RC Images
Added by
TpPartsRcXtreme
Date added
View count
1,489
Comment count
5
Rating
0.00 star(s) 0 ratings

Image metadata

Device
samsung SM-G955F
Aperture
ƒ/1.7
Focal length
4.2 mm
Exposure time
1/121 second(s)
ISO
40
Filename
20190127_085735.jpg
File size
5 MB
Date taken
Sun, 27 January 2019 8:57 AM
Dimensions
4032px x 3024px

Share this media

Back
Top