P6230022_zpscgcx5t3i

Hey, I recognize that dirt! Same as on my Raider!!!

Hey @Dreadstar , mind sharing info on your steering linkage?
Where did you find it?
Thx,
Steve

Ok,for those of you that may want to do this conversion,the GPM part # is AB4048,(Actually for the RC10B4). The bushing/bearing recess' need to be drilled out to 7mm and there are two small brass bushes that need re-bored to 3mm(Quite tricky). You will also require an M3 tap set. Costs,well according to the GPM web site,£10.69 or $15.10(US),so it's not all that cheap a part anymore.

@Dreadstar

Kewl! Thx!

A little bit of duct tape would do it... jeje