Senton senton 6s v3 2.8 tires

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Release the kraton

Fairly New Member
Messages
3
Reaction score
2
Location
Potterville MI
Arrma RC's
  1. Senton 6s
I have seen a bunch of stuff on people doing bigger tires on the 3s senton but I have yet to see anyone do bigger tires on a 6s. I was thinking of doing some 2.8 badlands on mine and wasn't sure if I would need to cut the body up to make it work. Anyone have any experience with this? as far as I know you cant adjust the height of the body on the 3s version but you can on the 6s so I figured maybe I wouldn't have to cut the body to make it work.
 
You’ll have to fit it on with the tires and trim a little at a time. Then run it find where the rub is and trim more. Shouldn’t have to take a ton off. To use bigger tires like that on a senton you’ll need to truggify it or get extended hex’s.
 
I use the Badlands on my senton but I use a different body. I didn't like how dirt, rocks and other crap got into the chassis area because of the tires being covered by the body. Once I changed bodies and the tires were out in the open I had less debris getting trapped inside the car.
 

Attachments

  • 20170428_192903.jpg
    20170428_192903.jpg
    245 KB · Views: 59
  • 20170629_193431.jpg
    20170629_193431.jpg
    395.3 KB · Views: 54
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top