Bearings mayhem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Just installed the Team Durango diff cups and it's a direct fit. The cvd's have no binding!
20180527_232921.jpg
 
Hi

Where did you get the out drives from.
From Germany, modelbaubochum.de (i live in the Netherlands). It does seem the only shop in the world who can still supply TD parts...

So I installed the front cvds onto the rear of my senton and been through 8 packs and no binding or blown bearing, super happy.

Just need to stop bending rear shock towers :/
I thought the Senton and Typhon have the same geometry, i'll check the manuals. Something must be different, thanks for the tip!
 
perhaps you can send some of those out drives over to the states...blew out another set of bearings today...ugh
 
Last edited:
Thanks for the info in this thread! I ordered the TD310480 from eBay for $10 with shipping and a set of driveshafts from JRC for $25. Is there anything else I will need for a Typhon 6S V4? Are the bearings the same size in the stock hubs front and rear?
 
Thanks for the info in this thread! I ordered the TD310480 from eBay for $10 with shipping and a set of driveshafts from JRC for $25. Is there anything else I will need for a Typhon 6S V4? Are the bearings the same size in the stock hubs front and rear?
I think that's it. And I want to say yes.
 
Thanks for the info in this thread! I ordered the TD310480 from eBay for $10 with shipping and a set of driveshafts from JRC for $25. Is there anything else I will need for a Typhon 6S V4? Are the bearings the same size in the stock hubs front and rear?
Yes the bearings are the same size. Only the HotRacing alu rear hubs have lager bearings.
I haven't cracked a bearing with this combo the past year!
 
Yes the bearings are the same size. Only the HotRacing alu rear hubs have lager bearings.
I haven't cracked a bearing with this combo the past year!
I’m more of an IPA guy myself ??‍♂️
 
Modellbaucenter by any chance? ?

Modellbau bochum.. Indeed..
Modellbau bochum.. Indeed..

But.. Im not sure why you would need em.. I built my (V3) left front CVD into my left rear just yet.. And seems to work fine with the stock outdrive.. Shocks all the way in.. Tire comes up just as far without problems..
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top