Talion 16t pinion stock spur on 6s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Joey6s

Member
Messages
28
Reaction score
9
Arrma RC's
  1. Talion
So I'm getting tired of the stock gearing on the talion . Went to my lhs today and picked up a Losi 16T pinion . Got the set screw off easily with a soldering iron . How long do I need to let the locktite set on the new set screw and pinion? Also, was wondering if anyone is having overheating problems running 6s with this gearing!?
 
i was running 14t on my Kraton 6S on the beach in sand, I would overheat motor to 200F half way through. would lose throttle , but have steering and blx185 blinking green. have to go to my car and run the ac on it.

I jut now got a new fan on it. I am expecting to
 
So it's 65 degrees out here in NJ and I just ran the talion with the 16t in it .. definitely gets hotter even in mild weather . I ran for about 15 minutes befor she got hot to the touch .. I usually shut her down when I can no longer place my finger on it for 2 seconds. I'm going to harbor freight today to get a temp gun .. this thing is a rocket with the 16t pulling wheelies at like 40 mph .. I have a speed trap across the street from my house once the traffic does down I'm going to do some blow bys to see how much faster it is .. on stock gearing and 6s I got 48-50mph
 
My buddy runs a 15T on his with pro-line trencher 3.8's on it. It does overheat on him though. When he does "speed" runs, he puts on a set of SRC terrain crushers.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top