Senton Anyone running Leopard 4092 1730kv on 6s?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
side skirts finished, and Gka rear brace arrived today also :geek:
IMG_9634.jpg

174F5ED2-5D2A-43A7-B1C6-219D64855078.jpeg
 
Last edited:
Motor connectors swapped over to 6.5mm, mounted with 25t pinion. Wiring straightened out and completed. Just waiting on the rear motor braces to arrive from England :geek:
517A894F-6021-49EC-B168-D6040A963FCC.jpeg
B5FBF190-4092-4444-84AD-54F4C2098EE8.jpeg
32B57751-46E3-4485-845A-A7F204B88A31.jpeg
040B5E12-2721-4721-BF78-8156BA87F196.jpeg
8DE88780-2DC0-4F79-A67B-FF9C5066C818.jpeg
 
I see you remove your center roll cage often on your Arrma cars to re-locate the speed controller. I saw this on your Kraton build, and now also with the Senton. Aren't you afraid the body won't be supported enough without the rollcage? The rollcage has a purpose right?
 
I have never had a internal rollcage on any rc in 30 years :geek: I also don’t drive it like I stole it either :ROFLMAO:

:p haha, that explains it a lot. I guess you don't really need the roll cage if you are not crashing hard on the roof of your car regularly. I like to do big jumps with my Arrma's and the landings don't always work out the way I planned :eek:. So I need that roll cage for extra insurance :giggle:
 
I have been searching for 5x months for the 40mm nitro exhaust mounts to use as motor mount/braces like I used in my Kraton with the tp 4070cm 2200kv. Finally found a seller in England and bought the last 3x he had real fast :D
D27A3C82-9169-4FF3-9E5E-906D0DD5A1B3.jpeg
58DB9930-5777-4EA3-9E82-F2F9C01C6BC6.jpeg
3FA8EBA4-1BE7-4F6B-A37E-3F6E405A93BC.jpeg
FF34AD5F-2121-4DDE-8695-2A126FA1D0FA.jpeg
8F961419-486F-4477-96AE-BA22CECD426C.jpeg
 
Last edited:
Drilled recessed hole in chassis for the rear motor brace aligned for the 25t pinion :) Now just need to polish the screw and mount the yeah racing twin fan on the motor.
DEE83199-CDC1-45A8-992E-9AC2F212B436.jpeg
02233E21-8580-43A9-A527-FB59E85AAE59.jpeg
95C9C6A3-757C-42BA-B4C1-D947036E00DA.jpeg
15CC300D-7BD0-4797-B08C-63AA9ED7D6FE.jpeg
 
Last edited:
More progress tonight; things are coming together nicely. Wired the yeah racing twin fans, adjusted stock esc mount to accommodate the killmode cap pack, and mounted the battery tray/receiver box :geek:
FF350992-0197-48EE-896D-6F0A35042AAD.jpeg
10ABAAE1-319F-4DA9-9D82-7B99D125E57F.jpeg
3B34DC9D-2601-46D8-AB57-5A5A37AF3377.jpeg
C537426C-3E7F-428B-827F-991B1B5A122E.jpeg
DC4BA99D-DEED-4EDA-96E7-23EF053BD2E9.jpeg
 
Oh yes :D Still going to be a while; body mounting will take some time. Again, body work is my least favorite part - that is why I started body first on this build. Going to do the same for another identical body.
 
When the wheels were mounted to the hexes and tightened they where hard to rotate. The inside of the wheel hub was just a hair too deep and caused binding.

1mm thick spacers inside the wheel hub did the trick ;) Had to purchase them though for a few dollars since I don’t have a 3D printer, but it was worth it.
37F7B193-4049-4665-B44E-04DE5A3D9536.jpeg
D4162D8A-24EE-493D-B651-4C822E3BB992.jpeg
 
After testing with the graphene 6s 6000mah brick I went with the following springs:

Front = TEKNO TKR6093 Shock Spring Set, 1.6x7.5T 80mm Orange 6.11 lb/in

Rear = TEKNO TKR6083 Shock Spring Set, 1.6x9.0T, 95mm, Orange, 4.80 lb/in

5D9782DE-B821-4A9B-80D0-F22894F4832A.jpeg
7B0EC085-AD7E-44D3-831B-84A8ABF3F898.jpeg
6A411DA1-AD0B-4459-879C-EB5B44DB1DE0.jpeg

23130EDF-17BE-42FD-972C-6E6BBD8D510A.jpeg
 
Deanodizing part 5 and shocks rebuild :p

Associated 80wt (1000cst) front and 60wt (800cst) rear.

Front = Tekno TKR8767 Low Frequency 75mm Front Shock Spring Set (Orange - 4.91lb/in)

Rear = Tekno TKR6093 Spring Set Orange 1.6x7.5T, 6.11 lb/in 80mm

View attachment 23147View attachment 23148View attachment 23149View attachment 23150View attachment 23151View attachment 23152View attachment 23153
You said the front is low frequency springs, are they like a buggy spring
 
The oringinal installation at the start were the low frequency springs but they were just too soft with the weight of the graphene 6s 6000mah brick. I swapped over to the Tekno orange springs above I originally was going to use on my Kraton build.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top