General RC Information
G2 belly pan to build upon.
Custom built 31mm differentials ( Open ) tho filled with a putty/lube paste ( THICK !!! )
CVD axles on all 4
Modified suspension yielding more travel and a taller static height. * Front spec shock towers & GPM shocks W/ ARRMA H.D. springs at both ends.
Machined aluminum upper A-arms F/R for wheel torque rigidity / low flex.
Custom Extended / Higher leverage steering plates on axle housings.
Rear end rock guard protecting rear shocks & Inner body CF rods to stiffen it.
H.D. steering racks and servo savers F/R
Powerhobby 760HV "F" & 9IMOD 45kg "R" are steering it.
BASTENS Quad steer module with 4 transmitter controlled programmable steering modes.
HW 10A UBEC taking power battery direct to both servos ( 6-7.4-8.4V selective )
7600mah 4S for primary battery powering every thing.
9IMOD Outrunner "Crawler" spec 1/10 scale brushless into a 17-1 planetary gearbox ( 23/46 geared at center diff )
Temp sensing Fan on motor, low speed Fan on ESC.
Huge wheel/tire combo with AXIAL SCX6 wheels and Pro-Line "HYRAX XL" tires ( 7.28" tall x 2.75 wide )
Lead shot added to wheels inner hub and taped over.
Additional BRASS weights added to front axle housings.
Adapted 6S SENTON body custom painted and heat folded / bent for clearances.
Custom Rear A-arm steering block to square up steering and differential alignment ( No rear kickup as front has )
*Running a OEM BLX165 ESC ... shopping for a crawler specific ESC to get the instant reverse feature and more Drag brake options.
Custom built 31mm differentials ( Open ) tho filled with a putty/lube paste ( THICK !!! )
CVD axles on all 4
Modified suspension yielding more travel and a taller static height. * Front spec shock towers & GPM shocks W/ ARRMA H.D. springs at both ends.
Machined aluminum upper A-arms F/R for wheel torque rigidity / low flex.
Custom Extended / Higher leverage steering plates on axle housings.
Rear end rock guard protecting rear shocks & Inner body CF rods to stiffen it.
H.D. steering racks and servo savers F/R
Powerhobby 760HV "F" & 9IMOD 45kg "R" are steering it.
BASTENS Quad steer module with 4 transmitter controlled programmable steering modes.
HW 10A UBEC taking power battery direct to both servos ( 6-7.4-8.4V selective )
7600mah 4S for primary battery powering every thing.
9IMOD Outrunner "Crawler" spec 1/10 scale brushless into a 17-1 planetary gearbox ( 23/46 geared at center diff )
Temp sensing Fan on motor, low speed Fan on ESC.
Huge wheel/tire combo with AXIAL SCX6 wheels and Pro-Line "HYRAX XL" tires ( 7.28" tall x 2.75 wide )
Lead shot added to wheels inner hub and taped over.
Additional BRASS weights added to front axle housings.
Adapted 6S SENTON body custom painted and heat folded / bent for clearances.
Custom Rear A-arm steering block to square up steering and differential alignment ( No rear kickup as front has )
*Running a OEM BLX165 ESC ... shopping for a crawler specific ESC to get the instant reverse feature and more Drag brake options.
- RC Type
- Truck
- RC Brand
- Arrma
- RC Model
- KRATON HYBRID Crawler
- RC Scale
- 1/6 Scale
Technical Specifications
- Power Source
- Electric
- Battery Type
- LiPo
- Motor Type
- Brushless
- Drive System
- 4WD (Four-Wheel Drive)
- Top Speed
- Under 19 mph
Additional Information
- Challenges Faced
- Lots of fabrication and pre-thought bringing it all together ( Been over 6 months building )
Getting differentials to be just shy of spool like locked, yet able to turn w/o pushing.
Testing outrunner motor and gearbox combo for sufficient power/torque finding it more than enough for the task at hand.
Rear wheel steering utilizing front end parts at the rear & adjusting/aligning it all getting correct function as a FWS rig.
