IMG_6249.webp

Typhon based street basher

A ridiculous over the top creation of a 328mm chassis created for the sole purpose of incurring maximum financial damage in the event of all inevitable shunts.

General RC Information

IMG_6249.webp

This thing was indeed a fun build. I was totally overthinking the electronics. I have a 6s cap pack on the Max 6, a 25a HW UBEC that powers its own dedicated DuPont board in the receiver box on the left side of the chassis to power the fans and lights independently. My amp-hungry servo runs off the ESC’s BEC on the receiver with a glitch buster! 😂 (I took this approach because I know the BEC on the Max 6 can easily handle the amp draw of the servo alone.)
Most of the specs are on the build log.
IMG_5978.webp

IMG_6255.webp

IMG_2799.webp

IMG_2804.webp

IMG_2816.webp
RC Type
Car
RC Brand
Arrma
RC Model
Scorched Typhon
RC Scale
1/8 Scale

Technical Specifications

Power Source
Electric
Battery Type
LiPo
Motor Type
Brushless
Drive System
4WD (Four-Wheel Drive)

Additional Information

Challenges Faced
It’s always a challenge and a very tight squeeze to jam everything into a SWB chassis, especially when I’m running an extra receiver box and a large cap pack, and still have everything look reasonably tidy.
Build Thread
https://www.arrmaforum.com/threads/street-speed-build.59842/

RC Build information

Category
Member RC Garage
Added by
Dan B.
Views
919
Last update

More in Member RC Garage

More from Dan B.

Back
Top