4x4

Finally getting the hang of front flips. Tip: only attempt with a very straight takeoff then brake just as you're leaving the ramp or as early as possible.

Completely official fix for cracking the chassis at the centre ?

Completely official fix for cracking the chassis at the centre ?

Anyone know how to remove the motor bearings in the BRCC? Or a video on how to do so?

recently purchased a new granite 4x4 550 and the first couple outings ran fine but last 2 outings after maybe 15 minutes after use it goes into a sort of limp mode, very little throttle and has low power, if i turn it off and back on again it seems to run fine, new to rc so not sure what the...

Hi all, I've got my Typhon mega upgraded to 4s now (woop). However, with the metal front and rear diffs and yokes, a hardcase 4s battery and 40mm can I am getting a lot of suspension droop and little rebound. Currently have the hot racing aluminium shock bodies with stock 4x4 mega springs and...

Couldn't do a double back flip with my first wooden ramp. So I made it a bit steeper for version 2

I have an arrma senton 3s blx and I wanna put dboots hoons on it for street driving. I don’t want to change the axels or anything I just want to be able to make it a quick change. Nothing loose or that has a lot of play. Not looking to buy 12mm hexes either

Looking to beef up the steering and wondered what everyone else has upgraded to. I did up grade to brushless and 2s lipo. Any thoughts Also put the granite tires on.

My servo in my big rock broke. Any recommendations for a replacement?

My Big Rock 4x4 3s BLX Just stopped steering this morning. I drove it 2 days ago and when I turned it on this morning it just wouldn’t steer. The throttle is working fine, and there is no dirt, grass, or gravel anywhere I can see. Any idea of what is wrong? And what I should do to fix it?

stripped the rear diff (not the fist time) and when doing the usual rebuild it seemed extremely tight and notchy, i have done all the normal stuff, moving the shim to the other side, no shim, lessening the yoke a little and its still notchy the input gear, ring gear and yoke are all new, the...

So was driving my granite 4x4 blx at a skatepark and jumped into the bottom of a concrete bench crushing the top of the body, motor fan and denting one of the capacitors on the battery lead coming out of the esc. Is the capacitor neccessary to replace? It still seemed to run fine as I didn't...

My son’s 4x4 Granite MEGA has been consistently losing throttle power (zero) every thirty seconds. After double checking the batteries (2S 2500 mah LiPo), the jumpers, and double-checking the motor that we replaced a few week’s prior, I decided—after browsing the forums—that the ESC was likely...

Slightly downhill concrete approach and a nice soft landing zone.

Hey everyone does anyone know if the Kraton and outcast 4s diffs will fit into the granite 3s because I’m hoping that the 4s diffs will last longer! Any help wanted thanks!!!

I'll blog my experience with this used Senton 3s BLX I picked up.

Hi all, Taken delivery of my Granite and had ordered a GT5 trans and receiver to come with it, swapping out the STX2 straight away out of the box. I have set the neutral/full throttle and full brake as per the manual. ESC settings are out of the box... I am finding that if the vehicle is...

Hello chaps, first post but been a lingering for a while. I have a typhon (originally mega 550 but ive been upgrading the life out of it... i know i could have bought a 6s by now but i enjoy the process and breaking bits too!). Anyways, i have upgraded originally to a hobbywing max 10 with a...

I want to upgrade from brushed to brushless motor and ESC any suggestions?