a-arms

Hey everyone just wondering if anyone has any Vitavon parts on ther 4s V2' and what you think specifically the A-arms!

Hello , if any one is looking to upgrade there there senton for speed,I have a few options 1st : a 26 tooth pinion gear https://www.amazon.ca/gp/aw/d/B07GQZQC7D?psc=1&ref=ppx_pop_mob_b_asin_title 2nd: small shocks...

I’ve had my Big Rock BLX for a while now and have been wanting to put on a lift kit and better shocks and arms. Any ideas, recommendation, or particular products? I have one of the old blue ones, not the new black ones.

Top: Granite arm Bottom: Typhon 3s arm

Hi I'm trying to find a full set of arms for a v4 6s Typhon . I'm after RPM one's a full set front and rear. Any one out there know a place to order from please. Cheers

I knew the stx2 transmitter was bad, but it’s even worse than I thought, but oh well, I knew my typhon was crazy strong, but I kinda don’t even know what happened, first of all, FIRST RUN, the esc cable got between the central driveshaft, and the driveshaft got split in 2, luckily, the cable...

As title says, Whats a good shock upgrade for Kraton 4x4 4s with RPM arms? My shocks and A-Arms on the kraton has broken multiple times and i have replaced the shocks and arm suspensions with stock ones. This time ill be getting the arms from RPM and people mentioned to get the typhoon 6s shocks...

I busted my rear arm its holded in by a zip tie for now was about to order a remplacement set but saw that they are not the sams has the stock ones at all look at them. They look a lot more weak.... The ones im about to order has a massive hole...

Attention to all the ARRMA 4s Kraton and Outcast owners, RPM has just released FRONT & REAR A-Arms for you! The new RPM Arrma 4s A-Arms are designed to not only increase strength and durability but also improves on the stock Arrma 4s A-Arms by removing the slop found in the stock arms. As well...

I have owned my Outcast 4s for about a month. In that time, I was able to drive it a total of about 20 minutes. Then an A-arm broke after a rather lame crash into a ditch. I called Horizon and was on the phone with a live person in a few minutes. They took my info, I sent them a video of the...

RPM has just announced Rear A-arms for the Arrma Typhon 4×4 3s BLX buggy. Coupled with their recently released Front A-arms your Arrma Typhon 3s BLX will be nearly bulletproof. RPM Typhon 3s Rear A-Arms Features Second shock mounting hole for increased adjustability 7 grams lighter than the...

Good news coming from RPM RC Products for owners of the Arrma Typhon 3s BLX with the release of the new RPM front A-arms. The RPM Front A-arms are not only lighter than stock but are more durable and offers more adjustability with the added second shock mount location...

hey guys! i was wondering if anyone had any knowledge on a better suspension arm, i keep breaking them in the same spot. ive got plenty of spares, and i could always be a little more gentle, but i want to fit some RPMs on it. Traxxas slash arms are CLOSE, the hinge pins are different and they...

Hey guys, I was out yesterday bashing and a tree hoped out behind another tree and ran into my Kraton. Result is I need to order a replacement lower suspension arm. What other relatively inexpensive parts should I look at buying now to maximise the route on the freight cost, while I am at it?

Does anyone know if these a arms for granite fit on the 4x4 blx version ?

Hi all, I’ve been thinking about getting rpm a arms for our rigs. The stock arms are really loose. For those of you with rpm a arms, do you need to shim them like the stock arms? Thanks

I put the rpm rear arms on to match the front today and I notice that the car cannot get its rear all the way to the ground. Runs out of suspension travel. No issue with the front. Anyone have this?

Ordered RPM arms but looks like the post office is going to screw things up. Kid is looking forward to his first time racing on Saturday. Arm has a crack in the back making it flexy and we lost a dogbone last time we ran it. We also broke the shock plastic end which I'm sure didn't help...

After much admiring of aluminum A-arms I have decided to order RPM for both the front and rear. Neither are broke, and I know deep down I shouldn't replace them until needed, but I feel like I needed something to do to my Kraton. Working on it is just as fun as driving for me, I find it relaxing...

OK, So I just got off phone, they said if enough people call , and they see a interest, let me re-phrase, EMAIL DON'T CALL, they'll make them, so all you Nero /Big Rock guys,drivers etc, you want rpm arms, start the emails.....traxxas is there bread n butter, everyone on here knows arrma a...