bearings

  1. Headbangerfacerip

    Castle creations 1515 bearings !!

    Hello, I recently bought a new castle creations mamba monster 2 combo with a sensored 1515 motor. I run in a lot of sand so I took it apart to clean it and put in some nice orange seal Boca bearings sense I have run them in the past and they are great. When I took it apart the shaft size bearing...
  2. T

    Senton Bearings for the senton

    Hi everyone My bearings doesn't work anymore and i'm looking for new one with rubber this time. Which ones can i buy here in europe ? Thank you in advance
  3. JvG

    Bearings mayhem

    Hi all, i need some help. I have a Kraton V2 and a Typhon V2 on 6S. Both are the best RC's i have owned. Fast, very tough and easy to maintain. The only thing that is really starting to anoy me are the rear hub inner bearings. After 2 to 3 packs i have to replace them otherwise they get stuck...
  4. Success LiPo

    Kraton Kraton Gear Mesh Busting Pinion

    Ok so after busting a million Pinion Gears, I decided to check the center diff and it seems that there is a lot of play between the bearings where it spins. The one bearing is housed in the red aluminum but the other is in a very flexible black plastic situation. Question 1: I'm wondering if...
  5. D

    Wheel bearings

    my tire is wobbling and feels a little rough when I spin it by hand it just doesn't seem right y'all think my bearing is shot in the wheel I haven't upgraded them at all there stock this vehicle it's on is my zombie ?
  6. Typhon

    How do you keep your bearings alive?

    The track i run on is a very loamy dirt track. The problem is its next to a river that periodically floods and dumps alot of sand on the track. My stock bearings in my typhon went out really fast so i replaced them with sealed AVID bearings. I hear these were some of the best but after a few...
  7. Y

    Typhon Changing Bearings!!!

    I want to know how to change all the bearings and what other pieces I need to change, when I disarm? Like oils or greease. If you have a video it would be much better.
  8. Paulie

    Repacking bearings

    I've been bashing in the snow with my Kraton and the Avid Revolutions just can't keep the crud out, especially the rear hubs. I popped off the rubber seal, blasted them clean with the CRC red can. I found this grease at the auto store. It feels to be about the right viscosity for these small...
  9. WoodiE

    How do you clean your RC?

    I have seen a couple threads and even get emails asking this question, how do you clean your RC? So I thought I'd share how I clean all of my RC's, plus others can share their methods as well. How to clean your RC How I have always cleaned my RC's have been to use a 50/50 mixture of water and...
  10. FastEddy

    Fast Eddy Bearings Intro.

    www.FastEddyBearings.com Team FastEddy entered the hobby business in 1999 as a major supplier of ball bearings to other hobby companies and manufacturers. Chances are you may be using our bearings and not even know it. As our hobby interests grew so did our product lines. In 2006 We opened up...
  11. Kauaiguy

    Kraton Arrma Kraton/Fasteddy bearings 2016 version

    Just ordered a set from the Fasteddy site( free shipping,$21.95) and noticed that there are two versions for the Kraton( old version/V2 version).Glad i checked before ordering as every other site i visited only had the old version.What bearings changed between the two?
  12. PeaCue

    Sealed bearings upgrade

    I noticed I some grinding + seized wheel bearings, so I took the opportunity to start replacing all externally facing bearings with sealed versions. Another member mention AvidRC for bearings, which has most at $1.00 ea, so I jumped all over it. I have to give a shout out to http://avidrc.com/...
  13. M

    Can I use Traxxas carriers on Granite?

    Is there away to use Traxxas bearing carriers on the Granite BLX my son breaks his a lot, wanting to go to aluminum.
  14. OrangeDRAGON

    Sealed bearing kits?

    Anyone have recommendations on sealed bearings? While pulling my diffs apart earlier this week I noticed the bearings are all 'shielded' but not the 'sealed' type. In the past I've been unhappy with some cheaper sealed bearings actually having more friction in them from the seals and/or being...
  15. Jerry-rigged

    Cleaning R/C bearings

    Running in water - A lot of RTR's - including the Arrmas - are Water Resistant. Yes, I know Arrma and others say Water Proof, but that is not true. My fishing buddies have a saying - water will destroy anything that is not water, or fish. :) You can't stop water, you can only slow it down...
  16. WoodiE

    GIVEAWAY: Ball Bearing Kit from FastEddyBearings

    The stock bearings in most any RC kit usually leave a lot to be desired and the stock Arrma bearings are no different. Thankfully FastEddyBearings has top quality bearing kits available for each of the Arrma RC models and better yet, want to give one lucky ArrmaForum member a Arrma Bearing Kit...
Top