blx

Hello! I am a complete newbie to the sport and looking for suggestions on what motor I should use. I recently purchased a Big Rock BLX V3 and upgraded almost everything with Hot Racing parts, M2C Racing, T-Bone Racing, and Spektrum. The car is upgraded tough and the only main factory item I...

Cheap ebay lights mounted well enough for me

And I'm SUPER thrilled with how it drives now! And lemme just preface that I run mainly on hard surfaces. Long story short, I roasted my rear diff last fall. So over the winter I ordered Arrma HD steel crown and steel input gears, along with Hot Racing aluminum yolks for front and rear and...

I picked up a used Senton 3S BLX a few days ago. It's been well loved, but also has a few minor upgrades. Some of the original bearings have been replaced, the front bumper was replaced (looks like another Arrma Senton from bumper), and the wheels and tires where replaced with street wheels...

Hello all! Hopefully this is the right place but I’m picking up a v2 granite “roller” tomorrow and wanted to convert it to a senton. I have a big rock and Tlr Typhon already and really been stuck on wanting a stadium truck lol. I know I need the lwb chassis and that’s in my cart on Jenny’s...

First off there (at the time I didn’t know) but there is a bearing inside the diff outdrive and I’m sure that bearing was destroyed. It was binding so I thought I’d throw a couple shims on the outdrive. Boom no more binding. I also was working with the diff while it was semi full and seating it...

I have an Arrma Kraton 6s BLX thats a few months old. I recently calibrated the servo(because it was turning to far to one side), and it was working fine for a while. When I turned the car on today the servo locked all they way to the right all by itself and makes a horrible grinding noise...

Can I use a 4S lipo in my big rock or is it 3S lipo only. I’m just askig because I don’t want to buy a 4S lipo and it now work.

My Typhon Mega V3 converted to a 3S BLX.

Alright, so now my servo is working, it turns now, left and right after I redound it. Now I have another problem, it doesn't throttle forward, it does go into reverse. It was throttling forward before binding it. I did unplug the throttle plug and plugged it back in and still no forward...

Good afternoon, I got a Typhon 6s about as month ago and enjoyed driving it around for a bit. Unfortunately I found all the upgrades available for these cars and I wasn't able to leave well enough alone. So here is a thread on what I have done to it so far. Parts List Castle 1717 1260kv castle...

Hi, my 8 year old son has a Senton 3S BLX. We only run it on 2S and it has a 13T pinion to slow him down and reduce damage. Not long ago it started making a horrible noise from the diff area. It turns out that the bearing for the Spur gear came apart in pieces, so I replaced them. But the...

Hi everyone, I bought a Kraton 6s V5 BLX recently, it is my first 6s RC, I only had a 2s 1/10 before that. I think I got a bit carried away with the backflip thing and I ruined my rear diff main gear (see picture). This I believe happend over only two packs. My first question would be: is...

Updated 6/22/21 Big Rock to Kraton transformation is now complete! You can find new and updated photos of the truck in the comments. Parts list updated accordingly! Hello friends! This is my second basher, but first time building a truck. I've owned the Big Rock for about 3 weeks now and as the...

I tried the hot racing diff in the rear of my granite and it didn’t work because the input gear is too long and it bottoms out in the slipper clutch housing before the motor housing snaps in place? Someone here can help me? I’m not using the hr yoke

Welcome to my build log of a 2 week old Senton BLX V3. Personal background: I've been in and out of the hobby since around 2000. owned and raced everything from micros to 5th scale gassers, electric, nitro and gas. I prefer crawlers the most and this senton is my truck for when I need a break...

I recently stripped my composite spur gear when i changed my pinion to 14t. I feel like it was a mesh issue that stripped it but to prevent further stripping of spur, Which steel gear works with the Senton 3s BLX V3. I have seen that the 4s steel spur might work but I would need 4s slipper pads...

I just got a Yeah Racing aluminum fan to replace the stock motor fan on the senton 3s BLX v3 and am having trouble finding any info on how to get these connectors to work. I did not realize that the connector plugs on the fans were different and am not sure where to go from here. I've searched...

I just recently replaced my rear wheel hub, and recalibrated the esc, along with new wheels. Once I was off to run it, the car struggled to move at around 15%throttle. under that it was running perfectly fine. I held the car in the air and it went full throttle no problem. once I put it on the...

hey there finally i got a granite V3 Blx as my first rc and i've got some soldering to do so i thought i should check on the gear mesh and the slipper clutch as i've read some had problems with them out of the box. i took out the power module, unscrewed the case, the mesh was a little tight so i...