differential

I have a new Kraton I bought a month or so ago . It is the V2. How important is it to shim its diffs ? I changed the center diff fluid to 100k and that's the extent of what I've done to it. I'm installing the orange springs (front and rear) this week. I've run it over grass(6s) a few times and...

Hey yall i have a new talion on my tenth pack run it started to get loud click in the rear diff and started binding so i took the diff out checked inside all was fine and i noticed the inside pinion bearing had alot of slop so i replaced that and all was good for half a batt pack now the...

Hi All I've read a lot of this forum but only just joined. Own a Senton - ran it close to 20 times, mostly stock - 4 cell only. I have had a number of parts replaced on warranty by Tower, most recently one of these: http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXECNS&P=8#technotes I...

I have rebuild all the diffs, and now i have a bad noise when I pull the trigger. I have checked all the diffs, and can not see any problems. What shall I do?

Just thought I would give everyone a heads up that not all of the diff shims are the same thicknesses. TD310475 sun gear shim - .007" TD310476/Arrma satellite gear shims - .006" Mugen E0206 sun and satellite gear shims - .010" I know a lot of you use a total of 6 satellite shims, 2 on one side...

There's been a lot of discussion about how the Outcast's diffs need to be shimmed. I have an Outcast on the way, and I've also purchased some the shims recommended. Can anyone give me guidance about which gears need shimming and how many shims of what thickness are recommended? Thanks.

Hi All, I've been searching but to no avail...Is there a diff locker or solid spool for 2WD Arrma vehicles? I'm looking for a more off the shelf solution than crumpling up small bits of paper and jamming them into the diff. This works well for low power applications, but i want to try 6S on...

I'm looking for a option for the diff or gearbox housing for the kraton, upgrades? also, the front knuckle is cracked, I see hot racing makes em, but anything else? Thanks Shawn

Hi, I'm new to the RC world and recently bought an Arrma Granite BLX 2016 version. My differential gear and idle gear stripped out. It's only two weeks old!! I want to replace with metal. Can anyone help with what I can purchase to make the swap? Thanks.

Hey guys I'm new here. Also kinda new to RC stuff. Bought a Typhon and senton in the past few weeks. Both trucks lost power to front wheels after 3-4 battery packs... kinda weird.... anyone with similar issues? I can't tell if it's the front or center diff? Could be both I guess. Bought new...

I ran my Senton on some gravel last weekend and when cleaning down i noticed some stones and stuff that had got caught under the rear A Arms against the chassis. To get them out I unscrewed the housing off the chassis that exposes the external gears of the diff and cleaned it all away carefully...

Hello guys, I'm wondering if you can upgrade the diffs on the outcast to locking diffs? I was just thinking of the idea of having that on the Outcast. Let me know.

Will a Talion front and rear diff inc case fit any other vehicles such as Senton,Nero or Kraton?

Hi Which kind of grease are you using outside the diff. I used this one, but I'm not sure if it's okay? http://www.hpiracing.com/en/part/z168

I replaced everything and this is what the front sounds like. The rear is hardly heard new bearing pinion gear ring gear housing and spider gears not sure what's making noise

Hey everyone, I keep reading about "shimming your diffs" I'm not familiar with how to shim your diffs or what it includes. I have found some videos online, but it is unclear as to what you are shimming and where you put the shims. Do the shims go behind the gears inside the diff? See first pic...

getting my diffs refilled and I need the thickest shock fluid for jumps. Can someone please tell me what's the best for rear front and middle diff fluid for Nero and Kraton. I jump both trucks and need the thickest shock fluid.

I inherited 2 of what i guess are the original arrma granite. Had the replace the electronics and motor on both. got them both up and running. One got brushless setup other got a brushed motor. both have held up pretty well except minor stuff. the one running the brushless setup has started...

Here's a useful chart to help you choose what weight thickness you should use your front, center and rear diffs.

Hello all my friends , colleagues will share with you the news of the last rollers of the craton , we see the result : the bursting of the satellite in the center differential, oil filled 10K I'm surprised that he's so fragile and small and thin just funny))).... Please suggest is there a...