differential

Hello. I found a wonderfull thread which i will be using to seal my diffs ( hope it will work ): https://www.arrmaforum.com/threads/manne´s-nero-bash-build-thread.2269/ Loads of information in there, so i ordered some screws / oils, and now i hope it will work. My tires were ( and still are )...

Are the Gmp as good as HR? I keep having diff problems and would like to solve them. Not sure what broke this last time...haven't pulled it open.

Hey guys I wanted to run the Talion one last time before I tore it all down to replace the bearings with Fast Eddy’s ones- and I took it out in the street on 6s and after just a few seconds the rear diff screamed. Well, I tore it down and what a mess was inside the diff housing! All greasy and...

My kraton has been down for months i need a crown gear for front diff. Im losing patience. We only have a few weeks of weather thats suitable to be outside playing. If anyone had ideas for alternative gear or wants to sell me one idc i need to get it up and running. Please help

Hello, I've lunched my composite idler gears in the gearbox of my 6 month old Mega Fury, which now runs a 4000kV brushless 3s setup and larger monster truck wheels. My Fury is a 100% basher, running mainly on grass and dirt, with occasional asphalt runs. I'm putting together new metal...

Is it ok to use 20,000,000 diff oil in. The talion and the kraton. Center diff only? I use it in my xmaxx. Just curious if manufacturers have different parameters for the center diffs. If it’s to thick, maybe 1,000,000weight? Thanks guys

Sad to say guys, but I hit a metal pole with my right front wheel going maybe 15 MPH, with my Typhon V2. No front end suspension/steering damage of any kind! However, my front diff housing basically exploded! I think this one is gonna cost me! Anyone think this might be a warranty claim? Thank you.

Could you use a different spur gear for you front or rear diff ???

Hi guys, Just shimmed my center diff and looked at TP center diff video. I noticed he didnt put extra the extra two shims on the spider gears and nor did he put shims on bearing shaft cup. I replaced the stock shims with the four mugen e0206 spider shims and two planetary shims for the other...

Installed castle's sidewinder4 3800 kv esc, motor first time trying on 3S rung off rear differential input shaft if anybody knows of any upgrade parts to keep this from happening please let me know thank you. Be Blessed and Blast On.

Any other brands of o-rings that will work with the diffs. My center is leaking and everywhere is out of stock.

I see a lot of information in regards to shimming the rear/front diff but nothing on the center diff. So do you still need to shimm the center diff? tia

i have a nero brushless with brain and am new to rc. To me it seems no matter what diff lock i put it in they all work the same. One option is suppose to be wheelie but i don't get wheelies. How can i tell if they are working properly?

Hi all. I'm rather new in this hobby and even if I did read a lot I still need more info. I bought a Voltage to my son and now I have problem with the differential I believe. See video: At first, its in the air and then I put it back on the table and we hear the motor, but wheels do not move...

I am looking into getting more differential oils. I want to try a bunch of different weights as well as stock up. I have always used Associated differential oils and have never had a problem with them. The only issue is that a lot of the oils seem to be out of stock everywhere I have looked or...

I just got this rc two weeks ago and believe the rear diff went out a bad landing. So I’ve changed everything Internals, spiral gear, and input shaft and soon as I hit mid throttle a loud clack happens and there go the teeth. 4 gears already. I added a shim to the one outside by the bearing...

hey guys, My first real run with 4 packs charged and jumping /running the truck hard. All is well but 2 small problems. 1: pinion came loose and moved. I tore it down and fixed it but what can I do to lock it down. I saw white lock tite mentioned. Is that the ticket? 2: center diff leaking...

I bought the Typhon after having such great luck with the outcast. I ran it for less than 5 mins and my rear wheels started spinning much slower than the front. When I press the throttle while holding the car on a loose surface, only the front wheels spin now. (keep in mind this car is brand...

I was planning to buy the HR diff case, but the one from GPM appears to be nicer. It is a 100-percent aluminum 2-piece design. It does not use the larger bearing, though. I have asked one person so far, a Youtube user who has tried both. He likes the GPM case much better and said the stock size...

Is there any way I can upgrade my differential?