esc

  1. K

    Arrma mega ESC using a 6 cell nimh and it keeps acting like it is loosing power

    I have a question i have the arrma mega esc i use a 6 cell nimh and it keeps acting like it is loosing power on a fully charged battery the motor is a brushed 15 turn dynamite what could be the problem
  2. hattrick300

    Granite New Motor on the way

    So I burnt up my ESC and motor in my Granite Mega 4X4 and need to replace them. Whats your guy's thoughts on this set-up? Anything I need to watch out for besides temps and gearing? Has anyone run this setup on a Mega before? If so what gearing did you use to keep it running cool?
  3. K4L4M1TY

    Kraton Can somebody confirm what the light on the esc is supposed to be doing after startup?

    Had my esc break a fan blade yesterday, checked temps, was able to touch it fine. Then today i disconnected the fan and switched it on and it acted like i had added throttle trim to it ie: it want to start crawling along and reverse wasn't working. Trimmed it back and it seems to be working as...
  4. cordell12

    Granite BLX Overheating - Castle Sidewinder ESC

    So got my son a Granite BLX, fun little truck when it works. The ESC seems to overheat pretty fast. Running 3s packs (esc rated for 3s) and it goes into thermal protection at 180 degrees. I have no fan, and seen Castle has a fan for this esc but the RPMs are 10k. Was wondering if anyone has...
  5. ChadFury

    Mounting my ESC?

    Does anybody know a good alternative to the double-sided foam tape, for holding down the ESC?
  6. Rider211

    Low voltage cutoff

    Anyone out there know why or have there cutoff kick in with 3.77v in all cells (sometimes it's 3.75s) or similar? I thought it was just my esc but I ran this 6s pack in my buddies talion today and it did the same thing in it.
  7. Slogrits

    Kraton Need a durable fan

    I have the yeah racing motor heat sync with twin fans. I need to replace the fans they have collapsed. Any suggestions?
  8. G

    BLX185 not turning on?

    Hello, First post. I just received my Talion V3 today. I bought 2 4S SMC batteries, 5400mAh and 90C. Charged them up, all cells reading 4.2V. Go to plug it in and press and hold the power switch for a few seconds and nothing happens. I tried switching the XT90 loop around and the same thing...
  9. Steve Brx

    Talion BLX 185 esc - Hobby Wing equivalent?

    I read somewhere that the BLX185 ESC is a re-branded Hobby Wing. I can't find that article despite a good trawl so does anyone out there know if this is the case, and if so, what the hobbywing model/ part number is? Thanks.
  10. Mr.Duke

    BLX185 fan upgrades?

    Ran (4) 6s packs through the Outcast today and beat the daylights out of this rig. The only thing I broke on it was a fan blade when I botched a landing from 12-15' up at the local skate park. I even let my 7yr old daughter practice doing backflips with it for 15-20 minutes. LoL Any...
  11. O

    ESC not working?

    I have a arrma granite voltage Mega in the ESC must have burnt up or something I'm not sure as soon as you plug in the battery the motor kicks on even if the remote is off I ordered a arrma granite 4x4 esc i was wondering if I could use the remote from the voltage Mega for the farmer Granite 4x4...
  12. S

    Talion Calibrating esc

    When u purchased a brand new arrma did u find yourself ever having to re-calibrate it.. I have a 15t pinion and i feel like it should be faster. Friend has a Kraton and it leave me behind.
  13. D

    Program box for Talion and Outcast

    Is there a program box that works well with the 2018 Talion and Outcast?
  14. Darknight99

    Motor types and ESC

    Would someone mind educating me on Brushless/Brushed motors. The last time I delt with eletric motors it was all about the brushes and the turns. The ratings seem to have changed now and the amount of stress put on them seems to make a difference. As an example why would I chose or not...
  15. S

    How long will a BLX185 last?

    I will like to know how long this system will last me if I run 6s everyday. I am running it in a 2wd slash. The system is brand new.
  16. T

    New senton will not run

    I just purchased an arrma senton with the brushed motor for my son's birthday. He had a blast with it for about 10 minutes, and now the esc flashes a red light and will not go. I tried letting it sit and cool for an hour, and brought it back out with a fresh charged battery and it went about...
  17. J

    Stalling

    Just upgraded to brushless in my Arrma granite with a Sidewinder setup. Everything programmed but sometimes when I'm running it there is a delay. I hit the gas and it will run and stall run and stall then take off like nothing is wrong
Back
Top