esc

So I guess this is two questions: 1) I know this setup in the 1/8 scale typhon will technically "run", but just looking for a sanity check. Will it be underwhelming? Hard to cool? Bad cogging? I'd be using a 3700 mah, 100c, 4s lipo with gearing to match stock 6s speed (50ish mph). What...

Hi all. I'll be getting myself an Outcast 8S EXB next month, so im speccing the electronics at the moment. Going with a Hobbywings combo but am I better with Max5/800KV or Max6/1100KV? I'm unlikely to be sending it off of skatepark jumps but I will be jumping it at BMX tracks and I want it to be...

Hey all, I just unboxed a new Typhon MEGA 550 and plugged in a fully charged NiMh battery. Whenever I give forward or reverse throttle, the ESC constantly beeps. I uploaded a video here, hopefully the link works: https://share.icloud.com/photos/0420rnSs8YTFP_3xHEkFcM4uQ Is this normal? It...

So i was driving my bl converted arrma granite mega and after i load the second battery in and drive for a little it made a swish kind of sound i immediately unplugged it and the esc had burned out, its got a arrma 4 pole 3800kv bl motor and a 60amp 3s esc a 100 amp esc is recommended for this...

The Max10 ESC is the only thing that’s overheating. I’m running this combo with 16t pinion 57t spur gear. after about 10 minutes runtime. This happens when I use a 2s 5200mah and 3s 3300mah. I think that my steering is off and the esc is trying hard to compensate for it while trying to power the...

I just purchased a 150amp firma esc (with the capacitors installed ) and When I press the power button nothing happens. I'm using a 3s lipo and the jumper cable. I also tried two 3s lipos. I'm wondering if I got sold a dead esc by my lhs. If I need to post photos of my esc I will but I don't...

Hey all, I am a Mojave noob and just finished running it for the second time and noticed this unplugged wire hanging off my ESC after cleaning. Can you tell me what it is? It doesn't have long enough wiring to reach the receiver and it looks like it plugs into itself?? Thanks, Dennis

Hi, I have a arrma vorteks. The esc has a flashing red light. I have tried the following to resolve: rebinding the transmitter and receiver 4 Different batteries unplugging the servo is this a case of a fried esc? many thanks

Self Made HW MAX5 Cover 🤪

So I guess I went a little too hard the other day with my Notorious and the little round rubber power button said bye bye. Does anyone by chance have a fried esc or a power switch with that button that they’d be willing to sell? Or does anyone know where to find a replacement? I’d be forever...

Which do you prefer, and why? I like that the Spektrum makes bleep bloop noises, but I'm curious about it's performance/longevity/quality/heat. Also, are the Spektrum 2050kv and the BLX 4074 the same thing?

So I wasnt going to make a post but out of frustration I thought I'll see what you guys thinks and maybe share my experience so other don't have this issue in the future. I bought a firma 150a esc and the 2050kv motor from Jenny's. I was seriously considering the hobbywing max6 combo with the...

Please help! i received a new Spectrum ESC from Horizon under warranty. The replaced the bad ESC that come with my Granite BLX. I just installed the replacement ESC and I have steering but no throttle. The red LED is blinking. I watched Razor RC;s blinking red light of death video but that...

I while back i posted a solution to the flashing red light of death on the v5 version(works with many types of Esc’s) i found out why and what caused it to break the only problem is that the water proof seal on you esc near the motor wire is leaking and to make sure of it try my sparking trick...

My ESC has a slow blinking green light, it will not reset or enter programming mode and does not do the usual chime on startup. Ive tried everything, RC/tx different motor etc. This ESC is from Jennys RC and is two months old as my original one that came with my V5 Typhon 6s crapped out on me as...

Just ordered an EXB. I have the spektrum 150a esc already and want to know what other motor sizes I can pair it with running on 6s? Stock is 4074. I could do that, but would be nice to have a little more oomph to haul around the extra EXB weight and not worry about overheating (have a...

Hi! So I just got my first Typhon TLR roller and I'm looking for advice on motor and ESC. Where I live (in Sweden) it's fairly easy to get a hold of Hobbywing products. So that's what I'm looking at. Any tips on the best motor and esc combo? I will drive this car sometimes at the track (not...

Hi all, just tried installing Polo Creations LEDs on my Talion EXB. I hooked the 3rd channel light control wire to AUX 3 on the receiver, however I am not able to switch the lights on/off on the A/B switch on the DX-3 transmitter. At this point, the car went haywire. The steering servo took on a...

Hi all, Just wondering if my Arrma Senton BLX ESC is going to die any time soon. Last week-end I found a new spot with a nice slope (though a bit steep at the beginning). I noticed that whenever I tried to start from the bottom there was like a cogging effect the car would not move the steering...

Hey guys, I just picked up a second hand v4 notorious, and was wondering how to change the punch setting to something a little higher? I can find information for a v5 but not a v4 unfortunately. Any help would be appreciated!