esc

so I purchased a talion and just started getting into the electric scene. I have the 20tooth gear in and have been constantly over heating running 6s 7500mah 100c. However I usually just let it cool off and I am good to go after. This time I got cut off my servo got locked and my esc is...

Just got the Kraton in the mail today ran it for prob 15min charged batteries ran for 5min later and motor cuts out completle fan and servo still work. motors still wont engages no noise when press trigger esc has a solid red light then the green light fades out. haven't even ran it on full...

I turned my Typhon on yesterday and was going through pre flight checklist and suddenly my esc started flaming. Any others with this issue? I hadn't even run the car yet so it was cool. Had to throw some dirt on it to put out the flames, I've had a li-po battery explode on me and don't want to...

This is going to be a "initial impression review" of the Hobbywing EZ Run MAX10SCT 120amp ESC and its accompanying model 3660, 3300kv motor. Some background: my brushless experience is limited to inexpensive (ok, cheap!) Turnigy components and systems from Hobby King (which ARE cheap and -knock...

I’m having issues when I run 6s on outcast. As I’m driving it it will by itself go full throttle for a second or two enough to wheelie and do back flips. It’s out of control especially when jumping. I’m thinking my esc is failing. Any ideas?

I haven’t been on this forum in a while! But I’m back and I have a question. I run a single 6s pack in my Typhon V3 instead of two 3s packs. The jumper plug needed to run the car on one battery gets really really hot! Not melting plastic hot (or at least I don’t know nor do I really want to...

Hello all, I have a almost 2 week old Arrma Kraton and the servo went out last week. I bought a Savox 1230 and a external bec to go with it based on other threads on here. I hooked everything up, running the power leads from the BEC to the positive and negative of one of the battery leads...

Does anybody know why I'm not getting reverse. Only throttle. Also my fan on my fazon is really loud

Hey All, does anyone have issues with the V3 ESC fan? I've broken the stock blades after a bad jump and replaced it with a Yeah Racing 30mm which worked great for awhile and now that's toast as well. I have the same Yeah Racing fan on my motor heatsink and that's still going strong, despite...

Pulled my ESC tonight to change the motor lead connectors for a motor swap and noticed the bottom of my ESC was cracked. I’ve beat this thing pretty hard but cracking the ESC case? Definitely wasn’t expecting to see that. Anybody else have this issue?

the motor in my v1 version burned out,,,,will the new v3 motor be a direct fit into the v1,,or do ina e to change motor mounts. Etc etc.,,,also do I need to replace the esc to go along with it... the motor that burned out is the red one......will the plnion be the same...thanks guys.....

My arrma is not turning left or right when going forward or standing. But turning automatically when going backwards. What can I do?

Im really torn between the two combos, price is not really to big of an issue but like most i don't want to waste my money on a brand name. I have the castle program card and have had some of their combos before sct and MM, but mow with hobby wing seeming to be everyone choice i would like some...

For every run for the past month my Outcast has been overheating. It has done this on 4s and 6s. I run a 16t pinion. I have had it since December and it never did this before this month. Does anyone know why this is doing this?

So, I am new. I have a v1 Kraton. I was in the process of looking into upgrading everything and getting it ready to run again because I bought it when they first came out (literally pre-ordered it), ran it twice, and haven't touched it since. I was advised by another member that I may want to...

Hello everyone, I have an internet friend who has the original red Arrma ESC that came with the Kraton. He told me last night that he has burned up quite a few batteries by switching between 4S and 6S runs. He stated that the low voltage cutoff doesn't seem to work. Having no experience with...

Kraton V2 running 6s with a 17 tooth pinon after about 5 minutes it dies with only a red flashing on the ESC. battery appears to be fine

Good afternoon everyone ,I’m having an issue on my first run this afternoon I ran my talion for the first time and it just stopped running ..I currently have the blx200 esc with the blx2000kv motor brand new purchase running venom 5s battery/50c . —- I took it out today ran it or should I say...

I promise I'm not trolling! What connectors are people running and why? I'm mostly thinking max 2-3S, as the 4-6S systems are out of my price range. I was originally thinking of using Dean's/Tee in the future simply because the Mega 4x4 come stock with them. A negative I have found with this...

Hey everyone, I have a V3 Typhon. I wanted to run it yesterday and 4 blinking green lights started to flash on the ESC. I tried factory reset and nothing happened. I want to send it in for warranty, but I changed the battery leads on it awhile ago. Any advise?! Thank you.