gearbox

  1. 9

    Kraton gearbox set ARA311186 from exb 6s rtr is it 7075-t6 ?

    gearbox set ARA311186 from exb 6s rtr is it 7075-t6 ? https://www.arrma-rc.com/en/product/aluminum-gearbox-set/ARA311186.html There is not show in description about material grade.
  2. R

    Vorteks Shock Tower/Gearbox Brace Solution

    Hi everyone...first time ive posted a mod ive come up with here (and my first rc) so be gentle haha I have an arrma vorteks that ive broken 2 shock towers on, before and after upgrading to traxxas GTR shocks. I know the general sentiment is to "get good" and "drive better" so it is what it is...
  3. F

    Kraton Shim Recommendations For Kraton 6s v3

    Looking for shim recommendations and sizes for the Kraton 6s v3. Specifically for the front and rear diffs, as well as the center driveshaft of the gearbox. Any input would be greatly appreciated.
  4. sr925713

    Outcast Help me diagnose/part out damage to gearing!

    See attached photos. Looks like during a nasty tumble my gearing got damaged. The car now if i push it forward locks up in the rear wheels. If i push it backward it kind of works but makes bad noises. So it basically has a bad mesh now, i think the large gear is now off axis, and whatever that...
  5. lost247

    Typhon Arrma typhon 6s blx185 slow top speed

    Hi I bought s/h blx185 Typhon 6s v4seems to have a low top speed Is there a high speed pinion I can buy. I think the spectrum v5 has a 20t high Speed pinion I'm not sure if that would work in the older v4 model. If anyone can help send me links for correct hight speed pinion for my blx185 v4...
  6. Prisma

    Granite Constant Diff Problems

    Hey everyone, I'm starting to be worried about how often my stock front diff on my Granite strips a tooth or two. I've rebuilt it too weeks ago, ran about 3 packs through it and the input gear has a tooth slightly shorter than the rest, causing it to slip once in a while. Now the infuriating...
  7. RAGER RC

    Big Rock Big Rock spur gear keeps stripping almost every run. Any suggestions?

    So I’ve had my big rock for 5-6 months now, and around 2 weeks ago I stripped the spur gear. “All right,” I thought “this is just a stroke of unluckiness. I was running the stock metal one, and my local hobby shop only had plastic, which was fine. Then it happened again. And again. And in the...
  8. marshy22

    Typhon 3s drivetrain gone tight after crash

    Hey, I’ve just had 2nd blast with new typhon 3s and hit a curb straight on not overly quick and bumper took the hit and show no sign of damage but now it feels like all the gears/drive train have gone tight. Only gave it quick test after crash but soon as you back off throttle Is slows the car...
  9. G

    BLX Metal Diff Gear Set Discontinued

    Anyone else looking for Arrma AR310416 metal gearset for 2wd BLX vehicles? I've seen that there is a composite replacement part#, anyone have any experience with the composite gears? I'd expect the durability on brushless would be pretty poor Thanks, Glenn
  10. N

    Senton Gearbox help!

    Hello Rc enthusiasts! Im new to the rc game and need some help. I purchased an arrma 4x4 mega. Within the first ten runs my motor went out, no big deal got a replacement but now i have a problem, I didnt pay too much attention when i took the gearbox apart (i needed to change my pinion gear) now...
  11. Slicktmi

    Outcast gear boxes full of dirt

    Do any of you guys have any recommendation on how to keep dirt out of the bulkheads everytime i service my diffs it's packed with dirt or is it something to not really worry about doesn't seem like the ring and pinion bind with all that dirtiness? Also my diffs have sealed bearings and has...
  12. O

    Kraton Kraton gearbox sealing problem

    Hi I bought a kraton v3 two month ago. I used it in a sand mine mostly. After fifteen batteries, there was a loud cracking sound from the rear differential. After disassembling, the gearbox was full of sand, and the main diff gear has two worn teeth, and the input gear seems worn too. It was...
  13. Lee Boyce

    Kraton Hot racing or GPM rear Gearbox

    Which one to go for HR or GPM? Why is the hot racing version not complete you have to use part of the original is there a reason for this? Whilst the GPM version is a complete housing What do you think?
  14. H

    Kraton Trying to remove front gearbox housing?

    Trying to remove front gearbox on kraton v3 and every screw came out except the 2 screws on the bottom of chassis right below front chassis brace seems like I have to remove everything off of chassis to get to them? Any tips or tricks how to remove? Thanks
  15. dpricenator

    Outcast Aluminum Gear box/ bulkhead for the Kraton and Outcast

    So I'm running thru the HOT Racing Site this morning, and noticed an item, that was not there last week. There is no picture and it is not in stock, but they did this before with a couple other parts they were preparing to release. Anyway, here is the part description. AON12E01 Aluminum...
  16. Restlessrustler

    Kraton Diff or gearbox case for the kraton? knuckles?

    I'm looking for a option for the diff or gearbox housing for the kraton, upgrades? also, the front knuckle is cracked, I see hot racing makes em, but anything else? Thanks Shawn
  17. Enfcr25

    Granite Gear diff

    Hi, I'm new to the RC world and recently bought an Arrma Granite BLX 2016 version. My differential gear and idle gear stripped out. It's only two weeks old!! I want to replace with metal. Can anyone help with what I can purchase to make the swap? Thanks.
  18. YZFR1

    Another bad tranny - Granite BLX diff problems -- any upgrades?

    My Xmas present Granite just blew its metal geared diff - totally freewheels now. This was after just a handful of runs -- all 100% stock, and running OEM NiMH battery. Truck is now getting shipped back to Arrma / Hobbico for inspection and repair, but I'm so disappointed. There's no way this...
  19. WoodiE

    Upgrade Mega/BLS plastic transmission to BLX metal

    So you've started with one of the Arrma MEGA or BLS models and now wanting to upgrade to a brushless and LiPo setup for longer runtimes and a much faster vehicle!? Upgrading Arrma Transmission from plastic to BLX metal Before doing so it's highly recommended you upgrade your plastic...
Back
Top