granite

Hello! I just got into rc and bought a used granite it is having a few problems it runs at a very low speed and when you throttle up it stops and you have to try again.if that doesn’t happen it only goes slow and turns the esc off . Tha is what happened in the video. I am using the stock battery

Hello! I bought a used Arrma granite and it is having problems. it is able to run very slow but when it picks up speed it stops. I am using the stock nimh battery. not sure if that would effect it. sometimes I can just pull the throttle and sometimes it goes sometimes it turned off and back on...

Hi there :) just got my son a Granite 3S V3. Its an awesome truck but i have som issues right out of the box. We run it with a Spektrum 2S 5000mah 50c battery, also brand new. When powering on there is no lipo count beeping what so ever. All we get is a green led 1 blink, thats it. Also...

I know there have been several post about converting a Granite 4x4 Mega to Brushless, but what I had in mind was a little different then what I was finding. I'm not looking for performance here, but durability/longevity under a 2s Lipo use. Backstory all 3 of my kids have Arrma Granite 4x4...

I bought an armma granite 4x4 and I have done a few upgrades starting with the motor. I have both a spectrum 4,000 KV and a spectrum 3300 KV motor with a spectrum 85 amp esc, currently running on 2S, 80 weight oil in the front shocks, 60 weight oil in the rear shocks, 21 tooth pinion 91 tooth...

Hey everyone, hope you’re all having a great day. I scored a Outcast roller for $60. The rear upper gearbox cover/shock tower is torn in half and the chassis is cracked too 😂. I have a Granite 3s chassis I bought for a spare. Could I swap everything over from the Outcast 4s onto the Granite...

Arrma Granite 550 Mega

this is my granite build so far. hoping to get some larger A-arms and a new wheelie bar. i got a streamline wing with the Typhon wing mount, and a Vorteks custom painted body with lowered body mounts. it’s more or less a cross between the Vorteks and the Granite

I’m gathering a few parts to begin the conversion on my bargain 4x2 Granite to brushless. I received my first package from Jenny’s today containing the BLX motor mount and fan and while at the bench I test fit my motor with the fan and the fan keeps the motor from fully contacting the mounts...

Hey all, happy Saturday! I found a used granite 3s in my area that looks to be in good condition, comes with an electron pro 100w charger, 5200mah 3s, and a spare set of shocks. there's not a lot of info on the listing besides that but the photos look alright. I talked him down to $175, good...

Hello! First post, long time lurker. The Typhon 3s is my first basher, I've had it for a few months and it's been a blast! Lately, as seems to be commonplace, I'm looking at getting bigger tires for flips and better off-road control. I know the badlands are the most recommended, but the price...

I bought a used Granite 4WD 3S BLX, which was stock except for the radio, an Etronix Pulse 3ch somethingy. I bought new 4600mAh NiMH batteries. Perhaps an error, perhaps not. They have been cycled (dchg/chg) twice after I got them. Charger is SkyRC D100 V2. Battery issue. The car runs quite...

So was wondering with all these different models in the Arrma family it got me thinking about what models share the same chassis with the Vorteks? As known this knowledge could open up all sorts of modifications and make some nice hybrids.

Hey Guys, My V3 Granite mega started off with its stock 15/91 setup and a brushed motor. upgraded to a metal spur and as a noob at the time i listened to my hobby shop and threw in the cheap Onyx 4000kv setup (Way too high KV for a granite). Surprisingly ran excellently. The 4000kv motor held up...

Hi all. I just replaced my rear drive shaft on my granite 4x4 with a front drive shaft. The guy at the hobby store did it. I noticed there is a small difference in length. Is this going to be a problem? Thoughts?

Hi guys hope everyone is well. I have a brushed granite (the blue one). I'm trying to upgrade the spur gear. I have a new 91t but the old plastic one was splined and had a bearing on it. Can I get parts to make it work? Maybe the bearing on the sleeve and insert it. Thank u in advance :)

Hi Guys, I'm new to the forum. I have bought the Arrma Granite 4x4 MEGA. It's my frist RC car. I added the exact model I have. https://www.arrma-rc.com/en/product/1-10-granite-4wd-v3-mega-550-brushed-monster-truck-rtr-blue/ARA4202V3T1.html On the web site it's indicated that the achievable...

Hello, I have an Arrma Granite That was once a brushed mega running the 15/91 setup. I then threw in a Onyx 4000kv system that after replacing the plastic spur to a steel one, ran just fine. Upgraded from a 2s(7.4v 5000mah 50c) to a 3s (11.1v 5200mah 50c) and still did perfectly. About a week...

Hey Guys, I bought a Granite a few weeks ago. So far I love it, it takes a pretty good beating. Yesterday evening I was running a battery down to storage charge it and put it away. While ripping around my yard, it was standing a wheeling heading out to the street. Thankfully the streets in...

Hey all so I had a question that I had been digging into and I wanted to get some additional input. I purchased a brushed granite for cheap in order to upgrade it to a brushless system (ESC and motor are dead) in order to give it to my family. I was originally going to try and just order the 3s...