hot racing

  1. dirtbagpvt

    Hot racing monster blower fan

    Just bought this fan from hot racing for my senton blx 3s. It's the hot racing monster blower fan, came with aluminum mounting hardware but can't figure out where or how it's supposed to be mounted. No videos online directions nothin. Anybody have idea or did I just get the wrong thing. Thanks
  2. ghozti3

    Granite Granite blx hot racing input gear diff does not fit

    I tried the hot racing diff in the rear of my granite and it didn’t work because the input gear is too long and it bottoms out in the slipper clutch housing before the motor housing snaps in place? Someone here can help me? I’m not using the hr yoke
  3. S

    Granite Hot racing pivot balls problem

    I purchased the hot racing pivot ball set for my Arrma Granite BXL. The pivot balls seem to be too wide for the upper link that connects to the upper shock tower. Not sure what to do....
  4. Loon_tune

    Notorious My First Build: Notorious Attitude

    Hi Arrmy! Thanks for all the help everyone has given me in the last year or two. Figured I'd document my rebuild project on my Notorious. I bought this a year and a half ago (V4) and honestly it's been broken more than not. Endless diff problems, stripping ring gears specifically. Tried all...
  5. Brian T

    Typhon upgraded Steel hot racing differential gear and input pinion now motor will not fit

    Okay so I installed a new steel helical differential gear and pinion input gear and aluminum differential carrier Case by hot racing, installed it in my upgraded Typhon Mega 550 with the HD 57 T slipper set 0.8 mod and now my motor will not go back onto this car I have been working on it for 8...
  6. Brian T

    Typhon Upgrade pinion gear now motor not fitting

    Okay so I installed a new steel helical differential gear and pinion and aluminum differential carrier Case by hot racing, installed it in my upgraded Typhon Mega 550 with the HD 57 T slipper set 0.8 mod and now my motor will not go back onto this car I have been working on it for 8 hours!! Is...
  7. Ivgot2manyRC

    Typhon Winter project. Complete NEW restoration with upgrades V6

    I got a Used & abused 6s typhon from eBay for 150$ I couldn’t pass it up. With a little TLC and $$$$ I’m gonna have this thing looking like a 2021 v6. Lol ? It came with hot racing bulk head covers front and rear :) GKA chassis braces, hot racing motor mount/diff cover that I won’t be using...
  8. H

    Kraton kraton 4s problems, diff and ball joints

    i have had this kraton for about 2 months (one of which i was wasnt on parts so it wasnt used) and during this time i have ran about 8 batts though it (4s) and stripped 2 rear diffs (ring gear both times [i think im typing this just after my 2nd diff blew but it feels the same as last times])...
  9. 20191229_203123.jpg


    Hot Racing Aluminum Center Diff cover Part # ANN38C01. Perfect fit. Less slack on the diff.
  10. dillon_mitko

    My post Christmas big rock build!!

    So I started off in April with m first ever brushless rc truck... the big rock 3s. Here’s everything I’ve done to it since. If anyone would like to calculate how much money has been put into this thing it would be appreciated as I’m kind of curious but forgot some of the prices? in no particular...
  11. HR Steering link and GDS frame brace.jpg

    HR Steering link and GDS frame brace.jpg

    Pics and a log of all the current upgrades to my Notorious. All Aluminum front & rear suspension mounts, frame braces, & servo mount. Flysky FS-GT5 Radio & receiver. RPM Bumper & A-Arms. T-Bone chassis skid & rear skid plate, steering bearings, HR steering link, HX3225 servo. All 3 HR diff cases.
  12. E

    Hot racing battery tray

    I know with the Typhon the battery tray can be modified to expect the larger Graphene Panther lipos well I thought I’d try the HR tray. Pleased to say they fit, the 6S 5000mah is 145x51x61mm and in my case the two 3S side by side are 144x51x62. It does require one of the edge plates to be...
  13. N

    Typhon Hot Racing shock bodies 3s

    Anyone had any experience with the Hot Racing shock bodies? I have the full tbone setup and rpm a-arms will get here tomorrow, but the last weak point I have read about is possibly the shocks....what's everyone think?
  14. Lufkin25

    Kraton v3 rebuild

    Just got started on rebuilding my kraton v3. I've had it for a few months now and have maybe 15 packs through it. I have learned a lot about these cars and made a lot of mistakes along the way. Hoping that some information or a picture I post will be able to help someone else with their build or...
  15. M

    Center diff bearing fit in Hot racing motor mount

    I just purchased the Channel lock secure motor mount for the 6S Arrmas and cannot get my bearing to fit the opening. It is the same diameter but just too tight of of a tolerance. Anyone have trouble with fitment of the diff bearing with this mount? I have tried to place my diff 2-3 times and it...
  16. [Hot Racing Aluminum Sway Bar Mount] Arrma Senton 6s BLX

    [Hot Racing Aluminum Sway Bar Mount] Arrma Senton 6s BLX

    Arrma Senton 6s BLX v3 did not come with sway bars like its predecessors. Added the sway bars and upgraded the mounts, as the stock plastic flexed and broke off.
  17. Swampshifter

    Outcast Hot Racing wing mount

    Hey guys, Just installed HR wing mount, looks awesome but should I try and fit the original wheelie rollers on it? I can file down the plastic bolt molds but am I wasting my time? Any help/recommendations would be cool. Thanks.
  18. Jared

    Kraton Hot racing lockers

    hi guys I’m new here and to the rc platform. My question is I have two hr lockers and was trying to decide if I would benefit from installing in the front and rear diff and increasing the center diff fluid to transfer power more evenly. Or should I lock the rear and center and increase the fluid...
  19. bennyly

    Kraton Hot racing chassis braces

    Little different look to the hot racing braces
  20. Kaotic

    Hot Racing Centre Spool

    Hi all First post and great to be part of the forums. I am wanting to fit the spool pictured to my typhon but I can’t seem to picture how it is supposed to fit. I realise a spur gear needs to be fitted on the 3 posts but my confusion on how the drive cups fit from the existing stock diff is...