mamba

Kraton EXB 6s, Castle 1515 220kv (sensored) motor and Mamba X ESC. DX5 remote I've tried to calibrate the ESC i doesn't recognize reverse. Hold throttle, power ESC on. i hear a few beeps then push the throttle forward (supposed to do a few beeps to agree) and it just beeps constant and red...

Build thread for my beast of a noto! I bought a roller based on a v3 platform, with these upgrades: m2c chassis, voltage hobbies towers and braces, hr servo saver, proline trencher 3.8s. Ran it on a hobbywing max 8 combo and realised the diffs were also shot. So now it has: 1) all metal diffs...

Hey guys i have an limitess with the spektrum frima 1250kv motor and mamba 8s esc gearing 34T spur an 30T pinion an after 2 passas goes 103mph but motor is 170 degrees an esc is 70 fan hasnt even kicked on ...so my question is will da kill mode / TP 4070 fit on da chassis without having to drill...

What setting in castle link changes it so when I'm going in reverse it sets a delay or neutral before going forward, Atm its going from full reverse straight into full forward with no delay, But it will not go from forward to full reverse without a delay or going to neutral first which I prefer...

Im really torn between the two combos, price is not really to big of an issue but like most i don't want to waste my money on a brand name. I have the castle program card and have had some of their combos before sct and MM, but mow with hobby wing seeming to be everyone choice i would like some...

I just installed a Mamba Monster X ESC. I tried to throttle test the Talion, and it just stutters like crazy without any acceleration. I checked the Castle Link setting , tried a few different ones, timing, etc. Nothing has changed this. Also, the ESC doesn't "chime" when I first power on the...

I am stumped. Ive been in RC long enough to check the obvious things, gearing, drive train binding, Lipo battery discharge rate, and bad wiring. But this is just beyond me now. I have smoked one Mamba monster X and almost smoked another. I have updated the ESC from Castle Link, and the same...

Hey everyone my Mamba Monster X combo with the 2200kv motor came today. I was gonna maybe try and install it myself but I have to solder the connectors on it and I'm a little worried I'm gonna mess something up. I tried looking online for a video on installing it in my Kraton 6s but couldn't...

Thinking of up grading mm2 or posiden Or any other good motor..Running on streets mainly.. looking for speed without the heat issue...

Hi all. So as the title states I have installed the Castle Creations Mamba Monster X esc/ motor combo. This combo is absolutely amazing and well worth the price!! I have installed the Arrma 17 tooth pinion gear as the 18T that came with the castle motor is the wrong pitch for the Arrma spur...

Here the speed demon t8 2650 mamba monster x grp s7. Im finally starting to get her dialed in. I had to send in both of my hobbywing esc. The 150a the bec fried the second time i drove it and the max8 the stupid power switch had a short after i ripped the front wheel off and the guy at the lhs...

Since i started off as a roller i figured i would show you what i got going on under the hood. This Arrma Senton is powered by a mamba monster and 2200kv motor with a 18t pinion, ESC and motor fan powered through a 5amp bec. I used a Traxxas esc mount to hold it down. Steering has a power HD...

Hey Guys! I have been reading this forum for a while. Learned a lot here and i truly appreciate it! So thank you all :) I had some bad luck with electronics in the truck. The ESC lasted 2 runs on 4s Lipo and the servo lasted 4 runs without hitting anything. I have since replaced all of the...