motor

I want a new motor and esc for my Senton, I have heard good things about castle systems and was planning on getting a sidewinder 1/8 scale. I plan on running 4s most the time with occasional 6s use, I will mostly race and bash. Any ideas for motors and esc other than the sidewinder. Sorry if...

I plan to warranty this motor, but i'm just curious as to what factors could have caused this motor to just lock up and seize mid run. Such a bummer. First run out after fully upgrading my bearings, diffs, diff oils, and adding all my hot racing and voltage hobby parts. Was super stoked to get...

So the bearings of my 2050kv motor ar broken. I've managed to dasasemble the motor, but I'm not sure if I have everything to rebuild the motor I have the shaft with rotor (including two small pins) the housing I have two bushings front and back-plate tiny screws for the front and backplate (see...

Anyone install motor fan(s) without taking motor out? Want to install Yeah Racing fans or comparable. Insight as to how is appreciated!!

Looking for help: Can I run a sensored motor with a sensorless ESC? And vice versa, a sensored ESC with sensorless motor? Thanks! ~Steve

Have a brushless emaxx with the mxl6 & 2200kv castle. Would this be an upgrade over the kratons blx185 2050kv ??

Hello I got my old senton v1 blx motor. It's really dirty inside. Mud dirt everywhere inside the engine. Does anybody know how to clean it? I took it appart and the thing in the middle is dirty too. I might clean that with some wd40 or smth. I might get some electrical cleaner from the shop but...

Hello I need a new esc and brushless motor for my Senton v1. I used to have 6s mamba monster in it but that was too much. Wheelies non stop. Does anybody know a good esc and motor for about 200-300 $ (best would be under 200$) that can handle 6s but not do wheelies all the time. I was thinking...

So I've done some reading here and I'm looking to do a battery upgrade in the next few weeks. I've had my mega for about 3 weeks. What I'm hoping to get is better performance on hilly terrain. From what I understand the NiMH batteries fall behind in the current delivery column compared to the...

I have senton with a blx2050kv (390112) motor will the blx200 work?

Castle 1717 big block and HR diffs! Was gonna go with Tekin but someone here mention this motor and its water proof.

Hi Im looking to upgrade the stock BLX 4074 2050kv motor to a Leopard 4092 but not sure whether I should get the 1730kv or the 2080kv Leopard 4092 motor to run 6s Lipo. I know you can gear up the 1730kv but why bother gearing up if you will get the same amount of torque as the lower kv leopard...

The Outcast owners manual states to run-in the motor prior to first use. It's listed in the first part of the manual under the ! section. This is how it's worded in the manual: Always ‘Run-in’ your vehicles’ brushed motor prior to use. ARRMA recommend supporting the vehicle with the drive...

Just a curiosity. Im looking into upgrading the stock motor and ESC after the summer/fall season. (Something to do in the winter). I'm wondering do to the similarities between the BLX185 and HW Quicrun why not go for something different? So I've had some heat issues with the motor getting super...

The Shaft coming out the motor sheared off, everything on the rc is stock. Is this a known issue? If so how should i go about fixing it, or possibly upgrading it.

has anyone changed their motor or esc out yet?

After the Big Rock's combo was not working anymore. I don't know what exactly fried esc or motor. I went for the Leopard 4282 with a Hobbywing Max 8. This combo is awesome, extremely smooth and powerful. It is a great improvement and doing backflips is much easier to control. The motor stays...

What is to hot for a motor? I run the Arrma Senton 20-30 minutes and it is hot as hell to touch.

So...... Everything is working on the Raider right now. I installed larger tires all around and this thing is an absolute beast! Goes through and over almost anything. Top speed has increased and steering is more predictable with larger front tires. the offset of the front is great than the...

My first try at running the tp4070 in the Nero was ok but I wanted lower cg so i cut and stretched the frame.