speed run

  1. Notoriousone

    Typhon First speedrun build.. V3 Typhon

    So, I got bit by the speedrun bug a few months ago and thought Id try building my basic blue V3 Typhon 6S into something a little faster. I've been in RC for years and had many vehicles, but never had a dedicated speedrunner. First thing I did for a month was research, and I quickly saw that...
  2. Arrma Typhon 6S speed run pass 94mph

    Arrma Typhon 6S speed run pass 94mph

    Arrma Typhon 6S speed run pass @94mph. Had done a few passes that day so the 6S battery wasn't at full power and the ESC/motor was already a bit warm but thi...
  3. GMballistic

    Stiffer shock springs, limiters etc for speed runs

    For those that don't know I do speed runs with my Arrma Typhon 6S, thread here: https://www.arrmaforum.com/threads/speed-runner-typhon-6s-uk-built-fast-not-bought-fast.10482/ I'm looking for some help/ideas please on how to stiffen up my suspension set up a little ~ specifically types of...
  4. GMballistic

    Typhon Speed runner Typhon 6S ~ UK built fast, not bought fast

    Decided to start this thread as I thought that it might be of some interest and maybe even some help to anyone else trying to use the Typhon 6S for speed runs. Now I'm new to "speed runs" with R/c vehicles so am learning as I go but definitely not new to R/c's having had a whole load of Tamiya...
  5. phildogg

    Kraton 116mph Arrma Kraton!

    Fastest pass on my newest speed project..
  6. J

    Senton Senton speed run advice

    Hello All. I just got an arrma senton 6s blx. I need advice on upgrades. I have stock gearing right now. I have it on 4s 5000mah 50c. It is so heavy, it only goes 32mph.
  7. bicketybam

    Granite Brushless Granite 4x4 Speed Run

    Mods: Castle Mamba-X ESC Castle 1410-3800Kv brushless sensored motor Arrma 32P 57T spur Arrma 32P 17T pinion Lectron Pro 3s LiPo 5200mAh 50C Rear diff input shaft mod Upgraded steering servo Proline Trenchers Spektrum DX3 transmitter and receiver I set the steering dual rate to -50% to help...
  8. F

    Kraton My first “speed” run on the dry grass

    I am impressed. 30mph. On the grass. All stock and with 4S batteries.
  9. Mr.Duke

    Outcast Outcast 12 tooth pinion speed

    I have a tekno 15 tooth pinion due in tomorrow so I figured I'd go out today and see how much speed I could squeeze out of the stock 12 tooth pinion. 2018 Version Outcast Deleted wing and lowered ride height to where the lower a-arms were parallel with the tarmac Best pass of the session was...
  10. Ramjet

    Tear/cut in Minokawa Tire. Seeking Repair Recommendations.

    When running Kraton with 6S and speed runs on the beach, I may have run over something sharp. With stock everything, tires were ballooning like crazy (of course). Suddenly, about 1/2 of the foam insert was ejected from a tear/cut in the tire. The cut is a 1/2 inch, straight, fairly clean cut...
  11. D

    Front Splitter/Bumper Replacement?

    I'm in the process of turning my Talion into a top speed RC, but I have some concerns after taking a bit of a scary front-lift moment and the car nearly back-flipping at WOT. Sure, we have monster rear wings, but I see nearly zero information on something like a front splitter or canards to...
  12. R

    Typhon Gearing and Lipos

    Just got a Typhon V3. Was running the stock set top except I had a 18T pinion and ran 4s. Got 45mph. Any suggestions on how to get up to 60-70mph without over heating. Just bashing around mainly on road. The ideas I have are 1) 20 / 22 pinion on 4s or 2) Run 6s with 18T pinion Help please
  13. ASenton

    Suspension setting

    Hi just doing some speed runs up and down the street. Still has the standard springs haven't got any stiffer ones yet. Just want to know is it better to have some rear rake or to keep the rear more level. And the droop is still standard so not sure to leave it there or try adjusting for less...
  14. thatyellowjeepguy

    Outcast Outcast speed runs!

    whos doing them!?!?! What have you changed so far? What tire set up? I know someone here has some info!
  15. Rchrdjrz

    How to check mph on Nero

    Hey guys, what kind of speedometer do you recommend to check some speed runs? I have a few rc' s that I want to see how fast they can run.
  16. L

    Typhon Stretched Typhon speed run project PICS

    Whats up guys, new to the forum and wanted to share my project and quest to best 150 mph. Started with a typhon buggy and modified the he'll out of it. As it sits I have a custom wound insanely high KV tp power 4070 cm 40x107mm motor running 6s. Gearing is 1.27:1 ratio. Yes it is geared higher...
  17. Trillium

    Typhon Typhon beach runs

    Hi guys, was just wondering if its best to avoid sandy salty beaches with Arrma machines to avoid salt damage or do these things embrace the stuff..? I have an expanse of hard packed sandy flatland around me but haven't dared bash it yet as I don't want my Typhon to corrode away and seize the...
  18. Bladerunner

    100 mph RAIDER XL

    Hello arrma community. I have a raider xl that i installed a 2200kv motor an esc combo in, beefed up rear suspension ,medal gears in the trans an foam speed run wheels an tires , motor an esc fans to keep it cool. Cap pack etc..Im running 34t pinion 48t My question is can u use a traxxas spur...
  19. Bladerunner

    Whats a good gearing setup for the 2000kv 4075 motor?

    Whats a good gearing setup for the 2000kv 4075 motor? I'm thinking about modding my raider XL with this motor for speed runs... Only cause i found it for a very low price on Tower Hobbies website.
  20. Bladerunner

    Raider Speed Raider

    I just got the raider xl mega brushed, I also installed the Velineon VXL-3s. I'm lookin to beef up the tranny and suspension, this buggy is only gonna do speed runs any ideas for tranny and suspension ??
Back
Top