typhon

I recently got a TLR Typhon. I'm upgrading the middle differential from a 50 tooth to a 46 tooth. When upgrading one diff, do you typically upgrade all of them to the same tooth count?

So. I was playing in the street last night when my neighbor who is a cop brought his radar gun out to check the speed. I swerved to miss him and the back tire caught a tire on a parked car in the street and yanked the rear arm off. The tire and arm was still wedge under the car tire when I...

Hey everyone, just installed a Castle 1515 2200kv motor and mamba X ESC into my Typhon TLR. Went with a 16t pinion on the stock spur, and just wondering what kind of speeds I should be expecting on 3s, and 4s. Threw in a 3s battery in there just to see how it would go and it didn’t seem too...

Hello! Just got on the forums. Got back into buggy racing and TLR Typhon seemed best budget before sinking into another chassis to see if I would like it again! Build: TLRT Typhon Motor: HobbyWing XeRun 1900KV ESC: HobbyWing XeRun XR8 SCT/ Pro TBI Servo: HiTec D954SW Rx/Tx: Sanwa rx-472 / M12S...

It's apparent to me that Japanese Sake is required to produce results like these: Now you know. I cannot confirm if he drank all the contents of the shipping box he used before, during, or after painting so don't try this yourself.🤣 Many thanks to @Ajag for another home run, exactly what I...

Ran a 100c 5200 powerhobby dead with a 20t. Absolutely no heat issues. Luke warm on the back of the can. Used to almost burn me running an 18t.

Eye popping. Absolutely stunned. So much metal flake.

Hello! I am looking to add addressable 5v LED strips to my 3S Typhon. I will be using an LED Bluetooth Receiver which can connect to my phone to program LED patterns. The receiver has a barrel connector for power input and can passthrough that power to the LED strips. I will be plugging an...

Hobbywing max6 ESC with the 4985 motor works perfectly in the Arrma Typhon V5by the way is my Friends Typhon

Drag racing is fun! even when I'm being a bully. She is going to get me in my sleep if I keep this up. :ROFLMAO:

So I guess this is two questions: 1) I know this setup in the 1/8 scale typhon will technically "run", but just looking for a sanity check. Will it be underwhelming? Hard to cool? Bad cogging? I'd be using a 3700 mah, 100c, 4s lipo with gearing to match stock 6s speed (50ish mph). What...

So I am on my second Typhon after needing a couple years ago to sell off my first. I went with another Typhon 3s, which I LOVE. Here is the question. I want to get another 3s car for my wife to be able to run with me, my dilemma is, do I get another Typhon 3s, or do I grab something like a...

I just love that shot

So guys, if you seen my last post about my motor burning up and life story on New to Arrma. I ended up replacing my stocked brushed with The Spektrum Firma 4000kv BL and ESC. Some of my bearings were seized that i rejuvenated with PB blaster and some marine greased packed in, good there. I will...

I have a largeish carpark attached to football fields just around the corner from where I live, the car park is usually empty so I can really let this 6s lady off the leash. I'm absolutely loving the speed, power and handling of this awesome car.

Evening all, just wondering if anyone out there is running this set up of all round 53/107 Felony tyres for speed runs with their Typhon? I’ve tried 2 sets of 42/100 Infraction style hoons and they just end up deformed and blowing off the rims. Running a MAX6 with a 1650kv, 30t pinion & 34t...

$300 shipped - TP4070 2200kv 8mm shaft (no bullets attached) - XLX Castle Creations ESC (8mm bullets) - 8S Ripple Killer Cap pack

The issue I'm having is I plug the charger into the wall, without the battery even being connected, and the charger will blink "green, red, green, red" and will completely not show an led at all anymore. My son hasn't been able to play with his car in sometime because I can't get the battery to...

Driveshaft broke. Is this a typical point of failure.

Hey Everyone, I have a number of bent screws on my Typhon and am trying to decide the best route moving forward. I've looked through some forum posts here and am noticing: Stainless Steel is not as strong as the black oxide screws, but offers rust protection (not a really big draw for me)...