- Messages
- 6,754
- Reaction score
- 12,426
- Location
- ST.LOUIS
- Arrma RC's
- BigRock 4x4
- Mojave
- Notorious
- Senton 6s
- Senton 3s
- Typhon 6s
Could this ever be used in a speedcar??????6000w continus,castle never puts there #'s out...
Limitless 12s talon 120 esc
- Thread starter K-BASH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
SrC
RC is a lifestyle choice
Lifetime Premium!
Premium Member
Excellence Award
Hospitality Award
Build Thread Contributor
- Messages
- 22,472
- Reaction score
- 30,870
- Location
- Queens, NYC
- Arrma RC's
- Fireteam
- Infraction
- Limitless
- Kraton 6s
- Mojave
- Notorious
- Outcast 6s
- Typhon TLR
Sorry, you cannot use this Air ESC for Surface RC rigs. Looks like a nice ESC if I was into planes and Heli's though.
Most Air ESC's don't come with a built in BEC. Batteries are primarly used for the the RX and servos. And actually safer to do this for Air use. A fail safe when in flight.
It doesn't have the usual Surface Settings/ F/W required for a car.
My thoughts.
Most Air ESC's don't come with a built in BEC. Batteries are primarly used for the the RX and servos. And actually safer to do this for Air use. A fail safe when in flight.It doesn't have the usual Surface Settings/ F/W required for a car.
My thoughts.
Last edited:
6000W (continues) isn't that high. On air applications max peak load is only ~15% higher, much different than surface applications where it can be like ~400% higher.
Though it's optimized for air, it could work on a small and very light speedcar. Would be hard to fit 12s worth of batteries and a suitable low kv motor in a 1/10 scale...
Though it's optimized for air, it could work on a small and very light speedcar. Would be hard to fit 12s worth of batteries and a suitable low kv motor in a 1/10 scale...
- Messages
- 6,754
- Reaction score
- 12,426
- Location
- ST.LOUIS
- Arrma RC's
- BigRock 4x4
- Mojave
- Notorious
- Senton 6s
- Senton 3s
- Typhon 6s
- Thread starter
- #4
I could fit 4×1500mah 3s packs in mini-typhon.packs would probly be smoking hot...could fit 3×2000mah...9s mini-typhon 
..would need a 1500-2000kv motor...this sounds like my kinda crazy build.
..would need a 1500-2000kv motor...this sounds like my kinda crazy build.
You would need all 12s to make the full use of the 6kw (50v *120A) most bigger drone packs should able to deal with the ampdraw.
I do think gearing up vs ampdraw on the esc will be the bottleneck. 8s with mm8x will likely still be better in this case
I do think gearing up vs ampdraw on the esc will be the bottleneck. 8s with mm8x will likely still be better in this case
