2019/10/28 Bashing the ERBEv2 and one jump with my outcast. :(

[olds97_lss]

Had a decent day in general. The revo stood up well. Broke a piece of the 3-piece t-bone front skid, bent the front pushrods, nearly broke my toe, pretty sure it was due to the broken skid digging into the ground and sending it straight at me.

The outcast had one jump that landed on one rear arm. Bent the hinge pin, both front/rear hinge pin retainers and snapped the output diff cup in half. Pretty bummed about that as I wanted to see how the fixed 1210 servo held up and if tightening the saver did me any good.

 

[jym73]

Pretty unforgivable bad landing. To resist to this kind of bad landing i would upgrade it with the JBIrc RF and RR a-arms braces and M2C hinge pins.

https://justbashitrc.com/shop/crcu-ar-563-rf-hinge-pin-holder-arrma-6s/
https://justbashitrc.com/shop/crcu-ar-564-rr-hinge-pin-holder-arrma-6s/
https://m2cracing.net/arrma/62-m2c3030-kratontalion-outcast-o1-tool-steel-hinge-pins.html

Or avoid this kind of bad landing

 

[JvG]

This looks like a standard landing to me
That damage is insane, very unfortunate i guess

 

[olds97_lss]

This looks like a standard landing to me
That damage is insane, very unfortunate i guess

Yeah, when I walked up to it, I thought the arm had just flexed (RPM) and the bone popped out. Then after I looked closer, saw the damage was pretty extensive.