35mm fans for inside max 6 housing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Rcproponent

RCP
Premium Member
ArrmaForum Fan
Excellence Award
Build Thread Contributor
Messages
6,384
Reaction score
12,563
Arrma RC's
  1. Nero
I’m sure it’s been posted but info has changed and sourcing and what not.

So, what’s everyone’s favorite? I have a couple protek’s but at $19 a pop it’s hard to swallow. Any others that perform well and aren’t $20 a piece ??

Thanks in advance.
 
Rocket 35mm. I needed to Dremel off about 1mm of the aluminium fan housing to make it fit. I’ve read others grind away a bit of the Max6 fan cover housing, bit I opted for the fan housing grinding.
Another option would be just to leave off the Max6 housing and use a 35mm fan cover instead.
 
Rocket 35mm. I needed to Dremel off about 1mm of the aluminium fan housing to make it fit. I’ve read others grind away a bit of the Max6 fan cover housing, bit I opted for the fan housing grinding.
Another option would be just to leave off the Max6 housing and use a 35mm fan cover instead.
They just bolt straight on.

7F84E562-AB2A-4A2A-8001-9659BFA08509.jpeg
 
Last edited:
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top