I'm pretty sure it won't give you anymore torque. You could always turn the punch up on the esc, but that will just break things more. Have you broken anything yet?Having a blast driving this thing! Have ran a few more packs through it the past couple days. I ment to post this before but didn't want to until i got to see if it worked.
I'm a very low Budget kinda guy and I was having a hard time locating a dust cover for my truck. So while I was waiting for the batteries to show up. I made one. I went to Wally world and bought one of these. $1.76
View attachment 151296
I had some Velcro and some bungee cord from another project. I cut the durag down to size and placed Velcro (hook side) on spots along side of the chassis. Then used E6000 to stick the Velcro (loop side) to the durag.
View attachment 151299
I used the bungee cord ran through the durag from body mount to body mount. Then used a piece of styrene sheet on the motor side to keep the cover off the fans.
View attachment 151300
It has definitely helped keep allot of debris out of the chassis. Some still gets in but not too bad.
View attachment 151302
My neighbor's granite would be full of debris in the amount of time I was running.
I also gave my motor a beard
View attachment 151303
Hoping that will help keep any rogue dirt out of the spur/pinion. I'm definitely thinking about going to the 15t pinion due to my driving style and conditions. Is it a simple swap or do I have to change the motor plate too?
Here's a couple blurry shots from today. On the trail by the house.
View attachment 151304View attachment 151305
I have to learn how to shoot and film fast rigs now. The few videos I've tried haven't been all that great. Will post one this weekend after I go blast around on the dirt hill at the farm. Maybe it'll turn out good. Thanks again for checking out my thread!!! Have a great day!!!!