Hey all. I’ve almost finished collecting all the parts for this custom ground up build which are listed below. My one concern for a weak point running 4s is the plastic 3s driveshafts and the differential gears and outdrives that I’ve mentioned problems with in another thread. Would I be able to use the Outcast 4s A arms, Driveshafts, and hubs on the 4x4 chassis for more strength? Are there hop up planetary/outdrive gears out there or anyway to use 6s diffs? As always, this group is awesome and I look forward to your input??
- 4x4 SWB Chassis
- Integy Steering Bell Crank
- Typhon 3s RPM Suspension Arms
- Typhon 3s Turnbuckle Tie-Rods
- Arrma CVD Slider Driveshafts
- Typhon 6s Shocks
- Tekno Shock Springs
- Front-80mm Yellow
- Rear-90mm Orange
- M2C 3075 Arrma 16mm ZRS Shock Caps and O-Ring Shock Pistons
- Hot Racing Aluminum Pivot Ball Set
- 4s Slipper Clutch/Spur Gear Assembly
- Hot Racing Steel Helical Diff Rings/Pinions
- Hot Racing Aluminum Differential Carrier Case
- Hot Racing Aluminum Differential Yolks
- Adjustable Motor Mount
- T-Bone Racing Front Bumper
- Arrma Wheelie Bar
- DSM Off-Road Bearings
- Hot Racing 17mm Hex Adapters w/ 10mm offset
- Pro-Line Badlands MX28 2.8” w/ F-11 Nitro Wheels
- Pro-Line Ford Raptor Body
- RC Maniacs Unbreakable Granite Body
- Castle Creations Mamba Monster X
- Castle Creations 1515 Sensored Motor(2200kv)
- EyeSky 20kg Waterproof Servo
- FlySky BS6 Receiver
Last edited: