Typhon 6s Shocks on 3s

[Mongoose]

For a couple buck more you can get these. They should fit perfectly in the eyelet and the tower.

I just ordered them too.

https://www.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=Lxjbuh

 

[Eluder]

I somehow spaced ordering myself the Tekno shock bushing so I had to get creative. After digging around the house for about a half hour I finally found the solution, the hose from a Windex sprayer nozzle. The end result is a perfect fit, the ID and OD somehow are dead on and the material seems pretty hard. I have a lot left over in the parts bin if need be. Thankfully we had 2 half full bottles below the sink so I also managed to keep myself out of trouble.

 

[sadlerbw]

Good suggestions. Tubing worked for me.

 

[cootertwo]

Nice info, thanks for sharing.

 

[Notorious J]

I somehow spaced ordering myself the Tekno shock bushing so I had to get creative. After digging around the house for about a half hour I finally found the solution, the hose from a Windex sprayer nozzle. The end result is a perfect fit, the ID and OD somehow are dead on and the material seems pretty hard. I have a lot left over in the parts bin if need be. Thankfully we had 2 half full bottles below the sink so I also managed to keep myself out of trouble.


View attachment 44135View attachment 44136

Nice tip. Thanks for sharing.

 

[arrmadave]

For a couple buck more you can get these. They should fit perfectly in the eyelet and the tower.

I just ordered them too.

https://www.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=Lxjbuh

Has anyone tried these on v3 typhon shocks on a granite? I don't really want to do the tubing, that will break down quickly. Thanks.

 

[tigertodd]

I put these on last night. Had to use an aluminum spacer as an eyelet bushing.

View attachment 29226View attachment 29232View attachment 29233View attachment 29234View attachment 29227

What shocks are those?