- Messages
- 1,306
- Reaction score
- 1,812
- Location
- Birmingham, UK
- Arrma RC's
- 4x4-Mega
- Mojave EXB
- Outcast 6s
- Typhon 3s
So I finally got round to posting my thread for my Typhon Mega as I have finally got my hot racing diffs!
What I've decided to do is put my pictures in the 2nd post and just spend the 1st post explaining what I've done to her. So from the rear you will see:
1) a Kratonn 6S wing, (unfortunately I couldn't get my hands on another Typhon 4x4 wing)
2) Hot Racing aluminium shock bodies
3) 3S tie rods
4) A gpm aluminium diff yoke holding a hot racing diff case with the helical differential gears and inputs (same up front)
5) 3S aluminium motor plate
6) 3S slipper with the metal 57t spur gear
7) stock Arrma 3S BLX motor and heatsink (20t pinion)
8) 28000 RPM fan
9) 3S shaft carrier and bearing with a 3-D printed flexible cover
10) Hobbywing Max 10 SCT 4S ESC with self made right angled interconnects
11) inside the radio box is the radio receiver for a fly sky IT4S
12) an AQ7 A7 BHM 18 kilo ultra fast servo (tbf it is too much)
13) hot racing server saver,
14) Gpm aluminium steering set
15) Gpm aluminium C hub and Carrier
16) Gpm stainless steel steering tie rod
17) stock Arrma 3S upper tie rod
18) hot racing aluminium shock bodies
19) the same front differential set up as rear
20) RPM rear lower front a arms
21) on all 4 corners duratrax 6 packs
22) rubber sealed bearings everywhere inc in the diff
23) hot racing pivot balls all around
What I've decided to do is put my pictures in the 2nd post and just spend the 1st post explaining what I've done to her. So from the rear you will see:
1) a Kratonn 6S wing, (unfortunately I couldn't get my hands on another Typhon 4x4 wing)
2) Hot Racing aluminium shock bodies
3) 3S tie rods
4) A gpm aluminium diff yoke holding a hot racing diff case with the helical differential gears and inputs (same up front)
5) 3S aluminium motor plate
6) 3S slipper with the metal 57t spur gear
7) stock Arrma 3S BLX motor and heatsink (20t pinion)
8) 28000 RPM fan
9) 3S shaft carrier and bearing with a 3-D printed flexible cover
10) Hobbywing Max 10 SCT 4S ESC with self made right angled interconnects
11) inside the radio box is the radio receiver for a fly sky IT4S
12) an AQ7 A7 BHM 18 kilo ultra fast servo (tbf it is too much)
13) hot racing server saver,
14) Gpm aluminium steering set
15) Gpm aluminium C hub and Carrier
16) Gpm stainless steel steering tie rod
17) stock Arrma 3S upper tie rod
18) hot racing aluminium shock bodies
19) the same front differential set up as rear
20) RPM rear lower front a arms
21) on all 4 corners duratrax 6 packs
22) rubber sealed bearings everywhere inc in the diff
23) hot racing pivot balls all around
Last edited: