DetroitSS
Member
My little Big Rock 6S is getting a little closer to what I want now.
17mm wheel hubs[taken off of my parts typhon]
One of my set of hoons for my infraction
Spektrum SR6100AT reveiver[paired with mydx5]
Hot Racing motor mount
Steel 57t spur[locked]
26t pinion
Hobbywing 150amp and 2100kv motor from my Redcat Kaiju[converted the Kaiju to 3s for relaxing bashing in backyard]
Gens 5000mah 60c 6S battery[had to print a 1/4 inch tpu battery riser for battery]
Had to print a little thicker and sturdier high speed driveshaft support[the stock one was moving a lot]
And then my TPU wing and wing mount.
About 70% throttle as I live on a pretty narrow street and have'nt got that gutsy yet. Need to finf some good speed run areas here in SW Detroit.
17mm wheel hubs[taken off of my parts typhon]
One of my set of hoons for my infraction
Spektrum SR6100AT reveiver[paired with mydx5]
Hot Racing motor mount
Steel 57t spur[locked]
26t pinion
Hobbywing 150amp and 2100kv motor from my Redcat Kaiju[converted the Kaiju to 3s for relaxing bashing in backyard]
Gens 5000mah 60c 6S battery[had to print a 1/4 inch tpu battery riser for battery]
Had to print a little thicker and sturdier high speed driveshaft support[the stock one was moving a lot]
And then my TPU wing and wing mount.
About 70% throttle as I live on a pretty narrow street and have'nt got that gutsy yet. Need to finf some good speed run areas here in SW Detroit.
Last edited: