Another source for Nero rockers.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

RC Detail

Active Member
Messages
216
Reaction score
129
Arrma RC's
  1. BigRock
  2. Fazon
  3. Granite
  4. Kraton 8S
  5. Kraton EXB
  6. Nero
  7. Outcast 8s
  8. Raider
  9. Voltage
Hello.

I’ve been out in the woods looking for Arrma parts, lol. Trying to find stout push rods currently.

But in my travels I came across these rockers. Now at least they have 2pieces vs. the Hot Racing and GPM just having that single plate and the “spacers” welded to them.

He give me just a little off sticker price, lol. So I promised him that I would shake some customers stools ( chair kind, HA ) lol.
But they were only for sale @ Ali Express so I asked this seller to stock them.


https://www.ebay.com/itm/2-Pair-Met...124417?hash=item2151130f81:g:yNQAAOSwkHxcQMU3
 

Attachments

  • E797A59F-3C5E-440A-A9D3-662DBD5C409C.jpeg
    E797A59F-3C5E-440A-A9D3-662DBD5C409C.jpeg
    53.2 KB · Views: 67
Not a bad price really. Just the waiting for them showing up would stink. I think I paid $20 a pair for integy rockers for my revos... and they ended up needing a lot of shimming or grinding to get them to fit so you could tighten down the bolt that holds them on without binding the bearings. Just not many options where they don't capture both sides of the ball end.
 
Well, they’re on the clock, lol.
 
I have my eye on those rockers as well. Love the fact that they’re anodized black compared to orher aftermarket units.
 
Suppose to arrive Friday. 2 weeks. Guess that’s better than a month.
 
Well usps was wrong. They’ve been out in the box since Monday, lol. So I ordered them on the 17th and showed on the 28th. Not too bad.

O and they’re stout. I pinched the open ends and neither plate budged.

Heard the Hot Racing are junk so these look ?.
 
Well usps was wrong. They’ve been out in the box since Monday, lol. So I ordered them on the 17th and showed on the 28th. Not too bad.

O and they’re stout. I pinched the open ends and neither plate budged.

Heard the Hot Racing are junk so these look ?.

I ordered me a complete set today after having read that you gave them a thumbs up. In all fairness, I would have bought a set from GPK if he offered them with a black anodized finish.

Can you please measure the thickness of one rocker for me? I'm looking to ditch the OEM pivot fasteners in favor of 5mm shoulder screws, but I need the rocker thickness before ordering and I'm not waiting for my rocker order to come in.
 
Never broke a plastic unit, no.

“An ounce of prevention is worth a pound of cure” B. Franklin
 
Well the open end that attaches the pushrod is what you could call flimsy?

I’ve pushed them open by accident and squeezed too tight a few times.

I messed up with the push rods I bought. At least I think. They’re Integy 125mm links for an Axial.
We’ll see.

I just need to figure out where to put a weak link?
 
Are you saying that the XRS Racing rockers you received are weak?
 
Are you saying that the XRS Racing rockers you received are weak?


No, I’m sorry.

Now that I re read...duh on my part, lol.
It’s the factory pieces I can pinch together by hand.
These XRS pieces are really nice. Their finish is similar to Hot Racing’s.

I have a set of Hot Racing rockers too that I initially wanted to use. I don’t like them. There’s not much to them to keep them from bending over.
GKA were just so big they look out of place, imo. They are very pieces though. Almost went that route actually.
 
These are the pushrods. I got lucky. Almost exact as factory in length.
Factory piece is 2nd from left
 

Attachments

  • 5AA796F8-7609-43AD-B522-43D2E3EDE0EB.jpeg
    5AA796F8-7609-43AD-B522-43D2E3EDE0EB.jpeg
    318.6 KB · Views: 55

Attachments

  • 7697FE1C-0F39-4EB7-B635-E3D041D50466.gif
    7697FE1C-0F39-4EB7-B635-E3D041D50466.gif
    1.5 MB · Views: 41
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top