Notorious Another thread for Notorious v5 servo horn!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

GamwToInsomnia.gr

Active Member
Messages
252
Reaction score
208
Points
153
Arrma RC's
  1. Notorious
After a mild crash right into the wall, i lost sterring, and when i check the car i found that horn is scraping the servo.
So, is there any servo horn to install and avoid that kind of things?
νοτοριοθσ.webp
 
After a mild crash right into the wall, i lost sterring, and when i check the car i found that horn is scraping the servo.
So, is there any servo horn to install and avoid that kind of things?
View attachment 411656
Just flip that short drag linkage and
mount it on the top of the servo horn..
You need to have an extension for the servo savor side (to raise it and have it flat horizontal
with a longer screw to match.
 
Honestly i don't know, don't remember if i put a screw on top of the serno (now i did to be sure!)
 
If your servo is a 25t then I would recommend ARA340198. It's geometry is a bit different than the old style and your steering rack will sit closer to center. They look a bit odd but they work.
 
If your servo is a 25t then I would recommend ARA340198. It's geometry is a bit different than the old style and your steering rack will sit closer to center. They look a bit odd but they work.
Unfortunately the only way to buy this right now is to buy an entire steering rack from Jenny's rc. The part number does not exist on the Arrma website.
 
Back
Top