Anyone adjust the HR Steering link?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

parcou

Premium Member!
Premium Member
Hospitality Award
Rig of the Month Winner
Build Thread Contributor
Messages
6,174
Reaction score
8,990
Location
Memphis, TN
Arrma RC's
  1. BigRock
  2. Felony
  3. Fireteam
  4. Granite
  5. Infraction
  6. Kraton EXB
  7. Talion EXB
  8. Typhon TLR
  9. Vorteks
I was looking at the stock steering link I removed on the Kraton EXB 6S and the Fireteam... well I should look at the Typhon TLR also.

I noticed the stock arm from the bellhousing seems to be in a different position on the horn from the HR steering link. Looks like I need to move the arm to the center hole of the HR horn to be equal to stock. Something I never noticed but I could also be wrong.

Anyone adjust their HR steering link on any of those 6S rigs mentioned?

1660098555956.png


Sorry for the blurred pic have no lights where I am at....power outage
1660098661362.png
1660098680396.png
1660098697767.png
 
Yes I had to move mine to the center.. if I remember right I think both the HR horn and fixed link were a little longer than the stock spektrum!! 😎

View attachment 235017

View attachment 235018

Good looking out on the pics...thx. I need to make some changes

You should be looking at 90 degrees at each angle there. I would try the middle hole and go from there
Looks like I need to move to the middle hole on the HR horn. Thx

However in doing so, not sure what change that will make to more turn or less...but regardless I see that I do need to match the stock arm. Using the HR as is not an equal match until I adjust it.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top