Anyone used one of these?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Messages
583
Reaction score
618
Location
UK
Arrma RC's
  1. Typhon 3s
Really don't like the tool that comes with the Arrma as standard, anyone use one of these?

Screenshot_20210419-132841_eBay.jpg


Screenshot_20210419-132837_eBay.jpg


Screenshot_20210419-133057_eBay.jpg
 
agreed, ive never used one of those (i use a tamiya wrench) and my stock plastic wrench got stripped trying to losen a wheel so i only use the stock tool for my slipper nut at this point.

im not sure about that wrench but it looks pretty quality to me! :)
Yeah I agree and at £5 it looks pretty decent 👍
I have one, it works fine. On deeper offset wheels there’s not much clearance for your hand.
Yeah I thought that may be the only issue
That looks fine but I use the stock part or a 17mm ratchet (you would get more torque with a ratchet)
Fair point 👍
 
I have it. Like JimboJr said it isn't great for the 1/2 offset wheels, but it works. I bought a longer more premium driver, but that has a thicker edge so doesn;t fit in my offset wheels.
On zero offset wheels both work great.
So stock Typhon wheels and Hoons, it should be OK?
 
So stock Typhon wheels and Hoons, it should be OK?
I bought one for my Typhon and it works good. As mentioned it is hard to get leverage on it and a ratchet with a socket works better sometimes. Also, had some Duratrax offset wheels and it barely worked. Other than that it is far better than the metal tube tool that comes with the Typon that destroys the wheel nuts.

Adam
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top