Arrma 3-4s Wing Mount Brace

[suchtragedy]

Hey all,

I have two granites with wing mounts and I always seem to break them on the rear support struts where the wheelie bar usually screws into it so I quickly designed up some sandwich plate braces to help support it better. Here's a link if you guys want to give it a shot. Fast and easy print and suitable in whatever filament you choose.

https://www.thingiverse.com/thing:4249767

 

[jondilly1974]

Are you nutting the left side?

 

[suchtragedy]

Are you nutting the left side?

You can drive a really long M3 screw through all the way and do that but I didn't have one that made it quite all the way through. I used a M3x20 on the right side and M3x8 on the left.

 

[suchtragedy]

You can drive a really long M3 screw through all the way and do that but I didn't have one that made it quite all the way through. I used a M3x20 on the right side and M3x8 on the left.

M3x35mm is just about perfect for single screw/nut.

 

[arrmadillo]

Nice mod!