Arrma Kraton 6s EXB w/ tons of upgrades
Pictures are right after my last bash(haven’t had time to clean it yet)
Also included pictures of when I bought it and started building it. And parts and upgrades etc.
(more picture w/ request)
Over $3.5k invested into this setup (I’ll add a comment with parts and pricing)
Asking $1200
Located outside of Pittsburgh Pa
Kittanning, Pa
The kraton has 6 charges(3 different days 2 sets of batteries each day) ran through it. “The batteries are always stored in storage mode until the night before I go to drive the truck”
I apologize for the dust/grass currently on the kraton in the pictures (haven’t had a chance to properly clean it after taking it out yesterday)
Overall the Kraton is in excellent condition. The body and wing has scrapes and scratches from sliding on it’s roof when it would flip over. But overall the truck is in excellent condition.
Truck comes with extra screws and misc. stuff
Here’s some of the big stuff (I have a full list of parts and prices paid for the parts per request)
ESC/Motor combo -
Castle Creations Mamba Monster X 8s w/ 1717-1650kv
CC High Performance Capacitor Pack
CC B-Link Bluetooth interface
-PPS - Motor/Diff Mount combo
-PPS - Mamba monster x 8s switch Mount/fan spacer
-Savox SW1210SG Servo
-DumboRC Controller & Receiver
3 sets of wheels and tires
-(2 sets dBoots Backflips 1 new set and 1 w/ a few charges on them & 1 set of new (proline badlands mx38 belted)
-Pretty much the whole M2C Racing upgrade list (except for the chassis upgrade and steering support)
-Hot Racing aluminum servo Mount and arm
-Hot Racing Aluminum Battery Trey
-Hot Racing aluminum Steering Blocks w/ hd bearings and carbon fiber steering arms
-Hot Racing Aluminum Rear axle carriers w/ hd bearings
-TBone Racing Front Bumper
-RPM bumper on the rear w/ a extra new spare
-Proline Brute Bash Armor body (new)
Charger and batteries
-Passport Ultra Duo 200w x2 AC/DC charger
-Power Hobby Pro Lipo 4s 6500 mah 100c (x4)
Miscellaneous
Plus various shock weights fluid(never opened)
Various weight diff fluids (never opened)
Replacement bearings
Extra screws and replacement parts
Few different pinion gears (never got around to trying different teeth pinions)
2 Replacement spare shocks
Extra out drive/shafts
New fast Eddie bearings never opened
Plus lots of other odds and ends
Again I have a full list of parts and prices
Some of the parts aren’t installed yet but are included. (The picture with the truck covered in dust/grass has the parts not installed laid out beside it)
Here’s a list of parts and the prices I paid with out taxes and shipping
adds up quick..
Chassis -
Motor/ESC and add on’s -
PPS parts -
Servo -
Receiver & Transmitter
M2C Parts -
Hot Racing upgrade -
T-Bone Racing -
1. Front bumper - ($46.99)
RPM -
Wheels/tires -
Charger and Batteries -
Miscellaneous Parts
Plus numerous other parts and spare parts not listed in the pricing.
Some of the parts I haven’t got around to installing yet. Listed below
I think there could be more. But it’s late and I’m dead tired. I’ll double check in the morning and update if needed.
I forgot it combined the comment with the previous post if no one commented yet
Sorry for the super long post haha
Pictures are right after my last bash(haven’t had time to clean it yet)
Also included pictures of when I bought it and started building it. And parts and upgrades etc.
(more picture w/ request)
Over $3.5k invested into this setup (I’ll add a comment with parts and pricing)
Asking $1200
Located outside of Pittsburgh Pa
Kittanning, Pa
The kraton has 6 charges(3 different days 2 sets of batteries each day) ran through it. “The batteries are always stored in storage mode until the night before I go to drive the truck”
I apologize for the dust/grass currently on the kraton in the pictures (haven’t had a chance to properly clean it after taking it out yesterday)
Overall the Kraton is in excellent condition. The body and wing has scrapes and scratches from sliding on it’s roof when it would flip over. But overall the truck is in excellent condition.
Truck comes with extra screws and misc. stuff
Here’s some of the big stuff (I have a full list of parts and prices paid for the parts per request)
ESC/Motor combo -
Castle Creations Mamba Monster X 8s w/ 1717-1650kv
CC High Performance Capacitor Pack
CC B-Link Bluetooth interface
-PPS - Motor/Diff Mount combo
-PPS - Mamba monster x 8s switch Mount/fan spacer
-Savox SW1210SG Servo
-DumboRC Controller & Receiver
3 sets of wheels and tires
-(2 sets dBoots Backflips 1 new set and 1 w/ a few charges on them & 1 set of new (proline badlands mx38 belted)
-Pretty much the whole M2C Racing upgrade list (except for the chassis upgrade and steering support)
-Hot Racing aluminum servo Mount and arm
-Hot Racing Aluminum Battery Trey
-Hot Racing aluminum Steering Blocks w/ hd bearings and carbon fiber steering arms
-Hot Racing Aluminum Rear axle carriers w/ hd bearings
-TBone Racing Front Bumper
-RPM bumper on the rear w/ a extra new spare
-Proline Brute Bash Armor body (new)
Charger and batteries
-Passport Ultra Duo 200w x2 AC/DC charger
-Power Hobby Pro Lipo 4s 6500 mah 100c (x4)
Miscellaneous
Plus various shock weights fluid(never opened)
Various weight diff fluids (never opened)
Replacement bearings
Extra screws and replacement parts
Few different pinion gears (never got around to trying different teeth pinions)
2 Replacement spare shocks
Extra out drive/shafts
New fast Eddie bearings never opened
Plus lots of other odds and ends
Again I have a full list of parts and prices
Some of the parts aren’t installed yet but are included. (The picture with the truck covered in dust/grass has the parts not installed laid out beside it)
Here’s a list of parts and the prices I paid with out taxes and shipping
adds up quick..
Chassis -
- Arrma Kraton 6s EXB Roller ($469.99)
Motor/ESC and add on’s -
- Castle Creations Mamba Monster X 8S ESC w/ 1717-1650kv motor combo - $389.95
- CC High Performance Capacitor Pack $23.95
- CC B-Link Bluetooth Interface phone/tablet or computer - $54.99
PPS parts -
- Grublock Adjustable Motor / Diff Mount Combo W/ Roll bar mounts - $121.99
- Switch Mount for Castle Mamba Monster X 8s - $16.50
Servo -
- Savox SW-1210SG ($92.99)
Receiver & Transmitter
- Dumbo Rc ($42.99)
M2C Parts -
- Front shock tower - $48.28
- Rear shock tower - $48.28
- Rear shock tower brace - $31.52
- Front center brace - $26.27
- Rear center brace - $26.27
- Front hinge pins - $75.25
- Rear hinge pins - $73.54
- 16mm zrs bleeder shock cap kit - $63.04
- Shock stand offs - $23.11
- Shock stand off bushings - $6.30
- Delrin pillar ball retainer bushings - $6.30
- Pillow ball retainer nut kit - $26.27
- Droop screws - $16.81
- out drives x2 - $16.81
- Out drives x2 - $16.81
- Pillar ball wrench - $7.35
Hot Racing upgrade -
- Servo mount - $23.88
- Servo arm $18.99
- Battery Trey - $54.99
- Aluminum rear axle arriers HD Bearings - $46.88
- Aluminum Steering blocks HD bearings - $49.88
T-Bone Racing -
1. Front bumper - ($46.99)
RPM -
- (2) Front bumper w/ skid plates - $18 each ($36)
Wheels/tires -
- Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels - $72.99 each (2 pairs) ($145.98)
- dBoots Backflip Monster Truck 6S Front/Rear 3.8 Pre-Mounted Tires, 17mm Hex (4 sets of 2) - $44.99 each ($179.96)
Charger and Batteries -
- Passport Ultra Duo 200w x2 AC/DC Charger - $269.99 (EC5 connectors + 2 balance boards) and a extra spare balance board
- Power Hobby Pro Lipo 4s 6500 mah 100c - $99.95 each (4) ($399.80)
Miscellaneous Parts
- Proline Pre-Cut Brute Bash Armor Body (White) $79.99
- Shock oil 6 bottles various weights $25.99
- Diff oil 5 bottles various weights $40
- Diff oil 20m weight $15
- Fast Eddy Bearing Kit $21.99
Plus numerous other parts and spare parts not listed in the pricing.
Some of the parts I haven’t got around to installing yet. Listed below
- Hot racing Aluminum rear axle carriers HD Bearings
- Aluminum Steering blocks HD bearings
- M2c Front hinge pins
- M2c Rear hinge pins
- M2c 16mm zrs bleeder style shock cap kit
- M2c Pillow ball retainer nut kit
- M2c Droop screws
- M2c out drives x2
- M2c Out drives x2
- PPS Switch mount (for castle mmx8s)
- Numerous extra stuff
- pro line brute bash armor body
I think there could be more. But it’s late and I’m dead tired. I’ll double check in the morning and update if needed.
I forgot it combined the comment with the previous post if no one commented yet
Sorry for the super long post haha
Last edited: