Big Rock Arrma Big Rock V3 Hot Racing Servo Saver Issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

SeaBass

Fairly New Member
Messages
28
Reaction score
10
Hello!

I have a Arrma Big Rock V3 that has been heavily upgraded. I purchased a Hot Racing Servo Saver attached with a plastic 23T (spline adapters for 23 tooth (KO, Sanwa, JR)). On the cars first crash the 23T spline adapter that is made of plastic broke. Do they sell a metal spline adapter for the HR Servo saver?



HR Servo Saver Link: https://hot-racing.com/?partnumber=ATF48SH02;c=1385

tempImageQJMY7q.png


tempImagebtFHxk.png


tempImageXoyBJd.png


tempImageeymW8c.png
 
I don’t believe so, you might be better off replacing the servo with a 25tooth spline and go from there with either that servo savor or maybe the 25tooth arrma version saver, but I believe the HR servo saver is 25tooth metal isn’t it?
 
I don’t believe so, you might be better off replacing the servo with a 25tooth spline and go from there with either that servo savor or maybe the 25tooth arrma version saver, but I believe the HR servo saver is 25tooth metal isn’t it?
I'm new to RC cars so I'm not positive on the HR Servo Saver being 25T but it does come with 3 plastic spline adapters in different teeth sizes. Link is provided.

The Spektrum Servo I purchased was expensive and hoping I can still use it. What if I get a 23T Servo Horn? Are 25t Servo's better to use?

My current Spektrum Servo S6280 link: https://www.spektrumrc.com/Products/Default.aspx?ProdID=SPMSS6280
 
My HR saver did the exact same thing. I just mashed a different adapter onto the servo and then the saver again. I haven’t tried too hard, but would love a saver that is metal without garbage plastic connecting it…
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top