Felony arrma felony 6s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

two0sicc

Active Member
Messages
74
Reaction score
24
Arrma RC's
  1. BigRock 4x4
  2. Felony
  3. Granite
  4. Typhon 3s
  5. Vorteks
what arrma bodies fit felony 6s with little/no mods? infraction 6s? outcast 6s? talion 6s? thanks
 
Whenever I have that question I get the wheelbase and width specs and start shopping bodies. I usually start here.
https://deltaplastikusa.com/
Often times if you get the correct size body all you need are some body post options.
 
I don't know if there are any other Arrma bodies that will fit. Possibly the Infraction, but I'm not 100% sure if it will clear the rear tires. My gut instinct says no however.

If you want to look outside of Arrma bodies, take a look at Deltaplastik as @Dan B. mentioned or Bittydesign.
 
Whenever I have that question I get the wheelbase and width specs and start shopping bodies. I usually start here.
https://deltaplastikusa.com/
Often times if you get the correct size body all you need are some body post options.
+1.

You seem to be mentioning Arrma off road bodies for your Fel.?
Not sure how you want to drive your Fel.
Most LWB bodies will fit the F/R wheelbase.
Just understand that since the Fel tires are wider at the rear, you need a Felony specific replacement body wide enough for the wider rear track width.

Unless you convert rear tires to Infr. specs., you need a Fel specific body.
 
Last edited:
would the outcast 6s exb body fit or would it be too short? thanks every 1
 
would the outcast 6s exb body fit or would it be too short? thanks every 1
Wheelbase of the Felony is 406mm. Look for bodies near that to start. Outcast is 328mm, so no. It’s much too short. Go to https://www.arrma-rc.com/ and you can look at specs for every model. Or find what you want in another body and fit/paint/do it up. Or don’t try to reinvent the wheel, maybe keep the Felony and get something else you’d like (truck) and mod that one the way you want. You don’t like the body on your Felony? I think they’re pretty bad ass! Maybe get a clear body for it and do your own paint?
 
i found a video- infraction 6s body DOES fit felony 6s.... with very minor mods. for front- switch body post positions, which entails removing 2 screws then just moving posts to second location already there, then trim front difuser foam 1-1.5 in. thats all up front. for rear- raise rear body posts up all the way-should have 3 holes showing on post when up all the way--- then you can drop infaction 6s body right on. thats it.
i love the felony body- i just wanted to have options in my stable.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top