Arrma granite not turning when going forward

[Robbix00]

My arrma is not turning left or right when going forward or standing. But turning automatically when going backwards. What can I do?

 

[GuyFromCanada]

My arrma is not turning left or right when going forward or standing. But turning automatically when going backwards. What can I do?

Have you made any modifications or repairs? Maybe wrong ports on receivers? Normal/Reverse switch not set properly?

 

[Jerry-rigged]

When the truck is standing still, body off, and you use the remote to try an turn the wheels, do you hear the servo trying to move? Do you see the servo arm moving? Does the servo sound like it is moving constantly, but the arm does not move?

The stock servo strips the gears pretty often. Replacing with another Arrma servo is not worth it. There are other $15 servos that will work much better, and last longer.

I have one of these $17 servos ready to drop into my Granite -
https://hobbyking.com/en_us/trackst...course-steering-servo-11-1kg-0-09sec-57g.html

If you use Banggood, here are two worth looking at - JX servos are decent quality, and not much money -
Better, $22-
https://www.banggood.com/JX-Servo-P...013372.html?rmmds=mywishlist&cur_warehouse=CN

Cheap ($14), good torque, but a bit slower than I like -
https://www.banggood.com/JX-PDI-622...ft-hotproducts__1&stayold=1&cur_warehouse=USA

 

[Robbix00]

Yes it was servo actually. As I've got brushless motor now I've ordered stronger servo by jx