Kraton Arrma Kraton rolling backflips

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
not that I can tell alot of people told me 1m was dumb and in that case just lock the center diff but I still get plenty of center diff action ... makes working on the diff a pain filling and waiting for bubbles to come up I let it sit over night with the 1m just cause lol it's like that saying a watched pot never boils lol let's just say it's a slow process
That's what I've been doing for the last 45 minutes. ....Waiting....

IMG_9772.JPG


I'm mixing for 800,000cst so I guess it could be worse
IMG_9773.PNG
 
That's what I've been doing for the last 45 minutes. ....Waiting....

View attachment 37198

I'm mixing for 800,000cst so I guess it could be worse
View attachment 37199
take a heat gun or hair dryer to it preferably a hair dryer so you don't melt anything really helps
take a heat gun or hair dryer to it preferably a hair dryer so you don't melt anything really helps
I steal my wife's hair dryer every time lol she said shes gonna buy a cheap one I guess hers is one of those fancy ones
 
I some how ended up with 1M fluid. What would happen if I put that in center diff of Kraton?
I found Woodies diff fluid table of "thick and thin" I'm more wondering what the limitations are. I'll likely go 200k in center and 20k front and 60k back like a sane person, but I have some sitting here and just wondering if anyone out there has done that? And what happened?
Nothing bad happens, it's handling preference. Some people lock the diff with a locker.... 1M is basically like doing that. Someone mentioned to sit the bottle of oil is warm/hot water first and it'll become more free flowing
 
Nothing bad happens, it's handling preference. Some people lock the diff with a locker.... 1M is basically like doing that. Someone mentioned to sit the bottle of oil is warm/hot water first and it'll become more free flowing
out side of being able to wheelie more I didn't notice any different handling issue until I went to high on my front diff started taking almost the whole road to turn around lol I guess wheelies are considered handling preference also lol so if you don't like wheelies don't go high in the center
 
not that I can tell alot of people told me 1m was dumb and in that case just lock the center diff but I still get plenty of center diff action ... makes working on the diff a pain filling and waiting for bubbles to come up I let it sit over night with the 1m just cause lol it's like that saying a watched pot never boils lol let's just say it's a slow process
1mil isn't dumb, it depends what you're going for. There's a few on here who run 1 mil religiously. I just won't use it in the Noto, I don't change front tires as it is.
 
1mil isn't dumb, it depends what you're going for. There's a few on here who run 1 mil religiously. I just won't use it in the Noto, I don't change front tires as it is.
yeah out of all the arrmas the notorious or outcast would be the last thing that needs more wheelie action
 
I some how ended up with 1M fluid. What would happen if I put that in center diff of Kraton?
I found Woodies diff fluid table of "thick and thin" I'm more wondering what the limitations are. I'll likely go 200k in center and 20k front and 60k back like a sane person, but I have some sitting here and just wondering if anyone out there has done that? And what happened?
I've got two center difs, both Hot Racing cups, one with 500k and one with 1M. It's pretty spaztic on 500 already, so the 1M should be a hoot.
 
I can make my kraton do standing backflips like crazy one after another I only run 50 front 100K Center 50k back I also have the upgraded pinion that comes with the truck and backflip tires on it right now I love it
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top