Kraton Arrma nero 6s throttle problem

[Marijn van Asveldt]

Hey guys,
I have a question.
the accelerator pedal of my arrma nero sometimes suddenly fails.
if this happens I can steer and do everything alone I can not accelerate.
When I turn it on in the esc, there is first a red light, then 2 times green and then it keeps flashing red.
Does anyone have a solution?
Thanks in advance.

 

[ABabyEater]

 

[jkflow]

What ESC do you have?
Red blinking typically means it has no connection to the receiver.
You can try a bind and throttle calibration/range adjust.

There were some issues with ESC going bad, a simple reset was disconnecting a motor wire, power cycle and reconnect but that depends on your ESC.

One example but worth a try

 

[#ARRMArcfanboy4life]

I have a solution sell the car to me (I plan on getting a nero this summer). If you want to fix it and keep it, I have no idea what is wrong.

 

[jkflow]

One more, posed the wrong one.

 

[valhorth]

I had something similar on my Kraton v4, I would turn it on, but the throttle would not work, only steering. This started happening after changing out my receiver.
I did a factory reset of my BLX195 ESC. Since then no more issues.

Looking at the Arrma website, your Nero should have a BLX200 ESC, correct?

Anyways, I used this video as a guide to factory reset my ESC. I think it is also usable on your ESC. Check your manual for instructions before, it might contain the information required to do a proper factory reset.

 

[Marijn van Asveldt]

Hello everyone, thank you for the comments. I really appreciate this. I'm going to try the things that you recommend to me. if it workes, I'll let you know!
(esc is a blx200)

 

[Marijn van Asveldt]

This .happens

 

[jkflow]

Are you saying the transmitter remote is not working i.e. the throttle is getting stuck ?
Just get a new transmitter, these are consumables and are worth $5 at best.