Notorious arrma notorious 6s v5 pinion problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

arrma butthead

Fairly New Member
Messages
2
Reaction score
1
having a problem with my stock 12 tooth pinion staying put on the motor shaft ... after first run i found pinion loose with e clip still in grove.after some blue lock-t cranked it down had my 2nd run the next day after my fun i noticed pinion moving again and this time e-clip was gone.. both pinion and spur are a little chewed up ... not impressed
 
Remove the pinion, clean the grub screw and the pinion. Remove all residue from the old loctite. Use alcohol to remove all oil/grease whatever and re-attach. Let the loctite cure for 24h and it will be fine.
 
Remove the pinion, clean the grub screw and the pinion. Remove all residue from the old loctite. Use alcohol to remove all oil/grease whatever and re-attach. Let the loctite cure for 24h and it will be fine.
thanks seems all good now
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top