henridrivefast
Active Member
Arrma please sell us smaller spur gears!
Plastic ones too so we can test ratios cheaper!
Plastic ones too so we can test ratios cheaper!
Arrma please sell us smaller spur gears!
- Thread starter henridrivefast
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
henridrivefast
Active Member
- Thread starter
- #2
http://www.ebay.com/itm/LIGHT-WEIGH...id=100005&rk=5&rkt=6&mehot=ag&sd=171649535817
NEW LIGHT WEIGHT 32T SPUR Differential 30T PINION FOR 1/8 BUGGY ON ROAD VORZA HPI
NEW FLY RATIO assemble center Diff 32T fit most 1/8 Buggy and ON Road scales. New light weight Thin pinion can add more performance to your Speed or (FLASH RUN's)
Those gears Ratio must be used by professional tuners , any standard rc car brushless engine from any brand cant hold the load from this gears ratio, we advice to use brushless motor 2000 kv or less , 80mm+ length And 150A ESC 6S
Im not sure if it fits on Arrma but im gonna try
NEW LIGHT WEIGHT 32T SPUR Differential 30T PINION FOR 1/8 BUGGY ON ROAD VORZA HPI
NEW FLY RATIO assemble center Diff 32T fit most 1/8 Buggy and ON Road scales. New light weight Thin pinion can add more performance to your Speed or (FLASH RUN's)
Those gears Ratio must be used by professional tuners , any standard rc car brushless engine from any brand cant hold the load from this gears ratio, we advice to use brushless motor 2000 kv or less , 80mm+ length And 150A ESC 6S
Im not sure if it fits on Arrma but im gonna try
Speedbuggiesrule
Fairly New Member
- Messages
- 23
- Reaction score
- 14
- Points
- 48
- Arrma RC's
Tj203
Fairly New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 31
- Arrma RC's
Its fits the screws just barely touch the motor mount and shave off maybe 1/16 of some material if you really want it to you probably out of shim I didn't care but with that gear ratio in a 22 pinion the stock motor wouldn't keep up it kept cutting out
