Senton Arrma senton help please

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

coopermc

New Member
Messages
1
Reaction score
0
Hey my arrma senton is making a horrible grinding noise when I try and give it throttle and it wont move only make noises
Please help
Thanks
 
Can you post a video or photos to help us help you?
 
Just from that explanation and no vid it sounds like your gear mesh is off. Did you check the pinion gear and are the diffs filled with oil?
 
Like Smili says. First slide out and remove motor module. Check pinion to spur mesh. If all fine, roll tires. With the drive shaft out, there should be no resistance and diffs should turn freely. Has to be one or another. Check Bearings on spur and ensure slipper is functioning and adjusted properly while you have it apart.Easy to pin down problem.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top