Typhon Arrma typhon 6s body options

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Mark_k6s

Active Member
Messages
84
Reaction score
121
Location
Westmidlands uk
Arrma RC's
  1. Kraton 6s
Hey all

What is it i need to do to add a truck body to my typhon? What parts and bodies will fit?

My typhon is truggyfied if that helps

Many thanks mark

20221120_143415.jpg
 
Pretty much any 325mm body will work on these, just check the width. Same size as Traxxas Slash, and lots of bodies available. DeltaPlastics has a ton, if you want truck bodies check out ProLine.
 
Pretty much any 325mm body will work on these, just check the width. Same size as Traxxas Slash, and lots of bodies available. DeltaPlastics has a ton, if you want truck bodies check out ProLine.
Thank mate :) will i need to change shock towers? For the body posts

Thanks
 
Thank mate :) will i need to change shock towers? For the body posts

Thanks
It totally depends on the body you choose. I buy the assortment of Arrma body mounts and use whatever ones fit my choice of bodies the best. Shock towers are usually ok unless you choose a low sports car body or something like that.
 
Buy the Senton 6s body posts , little bit of grinding to make them fit the Typhon shock towers .
Thanks, will have a look at getting these
It totally depends on the body you choose. I buy the assortment of Arrma body mounts and use whatever ones fit my choice of bodies the best. Shock towers are usually ok unless you choose a low sports car body or something like that.
Im looking to get a truck body, im going to have a look at proline now
Thanks
 

Attachments

  • H-AR320277.jpg
    H-AR320277.jpg
    14.9 KB · Views: 56
Will this set bolt straight to the typhon shock towers
Yes. You can come up with a combination of these that will allow you to mount a number of bodies. I’ve done VW bug bodies, truck bodies, Porsche 962 body, etc. and never had to use the Senton mounts, but those might work too.
 
Yes. You can come up with a combination of these that will allow you to mount a number of bodies. I’ve done VW bug bodies, truck bodies, Porsche 962 body, etc. and never had to use the Senton mounts, but those might work too.
Perfect thank you for your help i will post some update pictures when it has the new body
 
I believe you’ll need different front shocks towers
Because there’s no body post holes in the typhon tower

Or you could possibly drill out holes in your typhon tower

I could be wrong

Not sure how / where the Senton posts mount
 
I believe you’ll need different front shocks towers
Because there’s no body post holes in the typhon tower

Or you could possibly drill out holes in your typhon tower

I could be wrong

Not sure how / where the Senton posts mount
I was thinking of drilling the holes i have a spare typhon shock tower to experiment with
 
I believe you’ll need different front shocks towers
Because there’s no body post holes in the typhon tower

Or you could possibly drill out holes in your typhon tower

I could be wrong

Not sure how / where the Senton posts mount
I’ve used the unused shock mounting holes for the body mounts.
 
Thanks, will have a look at getting these

Im looking to get a truck body, im going to have a look at proline now
Thanks
The proline bodies I’ve had cracked pretty quickly. The two jconcepts bodies that I have are extremely strong.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top