Typhon Arrma typhon hobbywing max 6 combo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I don't know about max6, but I upgraded my ESC on Typhon 6S to EzRun Max8. Still to actually run the car. Hoping for tomorrow or sort. It works but to see the difference etc. Now about to buy the Hobbywing WiFi Express Module to it, to be able to control settings on my phone.
 
I have the hobbywing max 6 combo in my kraton but was also looking to fit it in the typhon. Has anyone else done this not sure how it will go. In the kraton its great. But have a typhon im putting together atm and thought about the combo in it ty
I've seen a guy on YouTube manage to fit a Max5 in one, another guy fit an XLX. It'll fit within the confines of the stock esc tray (I have a Notorious with one), you just have to barely get the corner of it against the front center diff mount, and the motor leads (mine from the 4985) I redid at a 45° angle to put less stress on the wires.?
 
I fits in the notorious/outcast fine so I don’t see why not
86E7E4BE-50A8-4B9C-AEFA-41A8B38DB97F.jpeg
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top