Arrma typhoon 3s throttle control problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

phillymikey

New Member
Messages
1
Reaction score
0
I have a arrma typhoon 3s blx
I took the receiver out to dry the inside of the box now the throttle is weird,doesn’t work on the pistol , works on the grip where there is a guessing a high low button? How do I fix this???
 
The steering (servo) should be plugged in to the first port on the receiver

The throttle (ESC) should be plugged in to the second port on the receiver

The black or sometimes brown (ground/neutral) wire on these plugs always face outwards, in the negative port (-), closest to the edge of the receiver
 
The steering (servo) should be plugged in to the first port on the receiver

The throttle (ESC) should be plugged in to the second port on the receiver

The black or sometimes brown (ground/neutral) wire on these plugs always face outwards, in the negative port (-), closest to the edge of the receiver
Easy way to remember this is 1 to turn 2 to burn.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top