- Messages
- 6,083
- Reaction score
- 13,912
- Location
- UK..
- Arrma RC's
- Infraction
- Mojave EXB
- Outcast 8s
- Outcast EXB
- Talion EXB
- Typhon 6s
So this isn't really a build log as such, more of a this is what I find along the way and mod as I go..
Big shout to @bicketybam for his hints and tips from his post on his Infraction..??
Here is the stock build just after fitting XT90's and before its first run...?
Had some titanium bolts left over from a previous project so thought why not fit them..!!
So here we are at the maiden run 9pm UK time, I'm on the left... let the carnage begin..?
So in the beginning I told myself no mods or upgrades this time... well I'm not doing too well so far..??
I love my Arrma's but I hate slop..? so front and rear shimmed with 8mm x 12mm shims..
I'm looking into some Tekno turnbuckles for the rear arms also, but I'm still working out what parts will work..!!
This mod was something @Thomas P did on diff pins so thought I'd try it on hub pins as I seem to break them quite often..!!
Basically you get some HSS drills and cut them to length, they are way stronger than the original pins..??
More to follow....
Big shout to @bicketybam for his hints and tips from his post on his Infraction..??
Here is the stock build just after fitting XT90's and before its first run...?
Had some titanium bolts left over from a previous project so thought why not fit them..!!
So here we are at the maiden run 9pm UK time, I'm on the left... let the carnage begin..?
So in the beginning I told myself no mods or upgrades this time... well I'm not doing too well so far..??
I love my Arrma's but I hate slop..? so front and rear shimmed with 8mm x 12mm shims..
I'm looking into some Tekno turnbuckles for the rear arms also, but I'm still working out what parts will work..!!
This mod was something @Thomas P did on diff pins so thought I'd try it on hub pins as I seem to break them quite often..!!
Basically you get some HSS drills and cut them to length, they are way stronger than the original pins..??
More to follow....